Monthly Archives: November 2014

Simple 3 Tips To Maintain A Dozer

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Prevention is always better than cure. Steady and éclat maintenance are key factors to keep the dozers in optimum condition irrespective of the age of the equipment, geographical and weather conditions. Age is the most important thing which acts upon the performance of a dozer. . If you have purchased a used dozer, you have to take extra care. As a used dozer has undergone wear and tear for many years, its level of performance automatically stoops down.

You may have faced problems with the performance of your used dozer many times and at the same time, you cannot stop using this equipment as it plays a major role in a construction site. So, why not maintain spend some time in maintaining your dozer properly? After you read this short article, you will realise how easy it is to keep up your dozer’s proficiency.

Tips to maintain a dozer properly

  • Checkups for steady repair: – Regular checkups of the dozer are essential to ensure a fine working condition. You should change the oil and other fluids in a systematic interval. If you keep your dozer in extremely wet climatic condition, it will damage more quickly. It is because rust will form rapidly on the important parts of the machine. In case of used dozers, the chains, bolts and the undercarriage should be checked to detect the damaged parts.

 

Checking helps to increase the life span of the constructional equipment. If you find any defaced part, immediately repair it with the assistance of a skilled technician. To avoid any kind of damage, don’t forget to use appropriate tools while checking. You should also put on Hard Hat and gloves while going through the machine.

  • Cleaning of the track frame: – To work in muddy conditions especially in winter freezes the mud on the track frame of the dozer. Therefore, you cannot ignore cleaning off the mud while the equipment is still warm. Use a track spade which perfectly fits into the gap between the track and the frame making the work of cleaning smoother for you. After cleaning, park the dozer either in the snow or on aged tires.

 

If you do not shovel the mud, it will freeze on the track creating a big problem for the dozer to start up and move. The finest way to unfreeze a frozen dozer is to control the heat and fire and to make use of propane light.

  • Maintenance of Electrical system: – Proper maintenance ofelectrical system which consists of batteries and wires should not be overlooked. Their periodical checkup is necessary to avoid short circuit. Replace the damage or old battery instantly once you detect them. Your wire should be good enough with an efficient fuse system.

 

Use 12 V batteries connected in series to ensure the working of your 12V radio for two-way business. You can also make use of an inline fuse system close to your battery. It will help the radio to work more effectively without causing any harm to the other parts of the machine.

To put it practically, routine maintenance of equipment will help you to save your money. So, it’s better to do minor fixing to upturn the average life of the dozer.

Related articles across the web

Are you about to purchase new heavy equipment? Check the specifications first

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Among the several other businesses, construction companies are gaining the popularity day by day. It happens because of its amazing advantages that help others to make huge profit from it. Construction business is the best platform to earn huge money and create a strong position in the market. Now, if you are a new comer in this field and want to run your business successfully, then it is important to purchase required heavy equipment for your site. There are many types of heavy machinery that can be useful in construction site such as bulldozer, excavator, articulated truck and many more items. However, there are some qualities that you need to know properly before purchasing the equipment.  The most important thing that needs your concern is the specification of the equipment. Every machine comes with different specifications that you need to learn in order to match up with your requirement.

Now you must be wondering that why the specifications are so important. To know the details of its importance follow the information below-

 

  • Features of the different machine: The most important thing of a machine is its features. Without good features a machine cannot provide good job. You must know that every single machine has different features. Features play the identity role of a machine. Whether you are going to buy an excavator or a bulldozer you will have to check its different parts and features. In fact, there are different models of excavator. You will get this item is small, medium and large size. You will get it in different price as well. To know more about equipment, you need to follow its specification. It will definitely give you a clear idea about the machine.
  • Required machine: It is very important to know the specification to buy exactly what you want. If you start to gather knowledge about its different parts and specifications then you will understand its value. Thereby, the fact is that specifications help you to get your required heavy equipment.
  • Good or bad: Well, through the specification of equipment you will be able to know whether the machine is useful for your or not. If you want to use it in your work place to carry heavy loads then you have to buy such machine that can perform it smoothly. By getting the clear idea about the specifications, you will be sure whether you can work with it or not.

If you are finding the best platform to collect the proper information about different specifications of different equipment then you have to search on internet. It is the best platform that can provide you correct news regarding such equipment. There are many sites available that deal with heavy equipment. You should follow the sites. Moreover you can talk to some people who have already used such machine. They can definitely help you o

Related articles across the web

Ensure That Your Construction Equipment Is Working Fine With the Heavy Equipment Grease Guns

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

One could easily equate working in the construction industry with the active use of heavy equipment. If you are an active on site construction worker, then you will find it hard not to work with construction equipment. Keeping this aspect in mind, one could easily decipher the importance that the smooth operation of the heavy equipment holds on the area.  This can only be possible only be possible when the equipment are maintained properly.

What Are Heavy Equipment Grease Guns?

Since the successful completion of a construction project largely depends on the smooth operation of heavy equipment, the importance that the maintenance of these equipment holds in the entire deal is quite evident. There are a number of devices on the block that are used for the maintenance of heavy equipment. One of them is the heavy equipment grease gun.

Generally speaking, a grease gun can be defined as a tool commonplace in workshops and garages, mainly used for the purpose of lubrication. In the construction industry, this device is used to apply grease or lubricant to certain parts of the heavy equipment when they are unable to operate smoothly due to increasing friction. A typical heavy equipment grease gun is used to administer lubricant by means of an aperture to a specific area, generally termed as the nipple or grease fitting. The aperture of the grease gun is designed in a manner so as to fit perfectly with the aperture of the mechanical apparatus to be lubricated. This ensures the application of the lubricant only where it is absolutely required.

Why Is Your Grease Gun Not Working?

The heavy equipment grease gun holds quite an important position as far as the smooth operation of the heavy equipment is concerned. And it certainly would not do if the grease gun that you are using does not operate properly.

  • Heavy equipment grease guns are likely to stop functioning if they get clogged over time with the accumulation of debris and the hardening of the lubricant over time. Getting rid of these impurities with the help of a pointed tool such as screwdriver or a pin has been found to be a great solution in such a situation.
  • The heavy equipment grease gun may also stop operating owing to dysfunctional or dead batteries. Recharging the batteries after detaching them from the device can solve this problem for you and get things going again quite smoothly.
  • If the heavy equipment grease gun used by you is a pneumatic one, then air leakage or blockage might pose a problem in the smooth operation of the device. There are seals on such grease guns that need protection from cracks, rots or decrease in air pressure.
  • Heavy equipment grease guns might also stop operating if it runs out of lubricant. You need to refill the grease gun in such a situation to make it work again.

Heavy equipment grease guns have been found to be the most useful device when it comes to lubrication of certain pars of the heavy equipment for optimal functioning.

Usage of heavy equipment for land clearing

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

To fitly maintain the land, it’s important to clear the land by ripping out unwanted trees and the undergrowth. You have to use heavy land clearing equipment like mulcher and grinder to perform the job. These equipment are utilised to manage the land and drains, construction of fire line and landscaping. Both renting and buying of the equipment are the two open options in front of you, you can opt for renting as it is cheaper. But the handling of such heavy equipment is not that much easy. So, if you don’t have the training to operate it properly, you should hire an expert who can easily do the task for your sake.

Types of land clearing equipment

Mulchers and grinders are the two types of equipment that the construction personnel used to clear the land. The attachments of the mulcher cut down bushes and trees, and level the ground without causing any harm to the landscape. It grounded the brushes into mulch which is later on replenished by returning it to the ground again. The equipment is eco-friendly releasing no harmful gases, and hence it is more preferred by the specialists to bulldozers.

Mulchers are sometimes attached with skid steers or excavators. The blade of each mulcher is different from the other one. The proficiencies of the blades directly depend on the terrain type and the brush which it is going to cut. The mulchers used in small excavators are undersized with the capability to withstand heavy loads.

The main application of stump grinder is to uproot the stump of the tree while not touching the sawdust. It does the work very quickly, which helps the operators to remove considerable amount of trees within a very short time period. These equipment are also available as an attachment to mulcher in excavators. It is mainly used for land clearing to develop and after chopping down.

Advantages of using latest land clearing equipment

The latest land clearing equipment are greatly efficient which performs every clearing job quickly and effectively. The excavators attached with a mulcher are more advisable to use because it helps you to cut down selective trees without damaging the soil. It will allow you to maintain those parts which you desired and hence reduce the total expenditure on developing a property. Mini excavators with a mulch will help you to make profit when you plan to resale it as it assist one in replenishing the land.

Both the stump grinders and the mulchers deliver incomparable clearing work which automatically compels one to immediately go and purchase it from an authentic manufacturing company.

Advanced Forests, Ammbusher, Bandit Industries, Barko Hydraulics, CE Attachments, Blue Diamond, Continental Biomass Industries are some of the companies which has left their footprints by delivering high-quality lad clearing equipment. All of them are cost effective and designed to fit skid steers and excavators. These machines have variable angle cutting adjustments and variable speed.

Go now and purchase the right land clearing equipment from your selected company and do the interesting job of clearing the land with the help of the professionals.

Related articles across the web

Accidents associated with construction equipment

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Construction equipment are generally heavy and one has to be cautious at all time to minimize the risks that can happen from bad handling and lack of proper maintenance of this equipment. Heavy construction equipment used in big construction companies make the construction much faster and easier. There are always some risks associated with the heavy construction equipment which can have disastrous consequences. According to the Occupational Safety and Health Administration (OSHA), 75% of workers at construction equipment factory became victims of accidents. Some of the risks of using construction equipment are listed below.

  • Site fall: It includes roof related falls, scaffolding falls, elevator shaft falls, crane falls and falling objects. Over three hundred deaths arise from construction site fall every year. Though some companies pay compensation for the injury caused to the victim, but do you think it’s enough? Safety precautions should be taken by the construction equipment to ensure well being of the worker.
  • Roof related Falls:– Roof fall is one of the most common form of accidents. This includes skylight falls, communication tower falls and fall through existing opening. Many of the deaths and injuries can be controlled by proper protection equipment.
  • Crane Falls on Construction Site:– Cranes are designed to control enormous pieces of powerful machinery. The operators can also fall from crane due to loss of its balance.

 

  • Other common form of accidents using construction equipment are:
  • Forklifts
  • Backhoes
  • Bulldozers
  • Front-end loaders and
  • Skid Steers.
  • Steps to avoid such construction site accidents
  • Allow only trained and expert professionals for operating heavy equipment.
  • Equipment has been designed properly and safely manufactured.
  • A display of warnings on the machinery should be there.
  • Equipment is needed to maintain regularly with periodic checkups.
  • Find out whether the machine is properly carried out or not with tightened bolts, nuts and screws.
  • Check the trailer deck, stability and clearances.
  • Be careful of overhead hurdles and underground utilities like water, sewer, electrical lines, gas and telecom.
  • Find out whether any unconventional sound is coming or not from the construction equipment.

Accidents related with construction equipment is mostly categorized into two categories. Firstly, it’s improper maintenance management system and the way of its handling. And secondly, defect in the design or manufacture of the equipment including absence of proper warnings.

Sometimes there are also electrical accidents due to the construction equipment. OSHA has issued some guidelines for the safety of the workers with construction equipment and some precautionary steps that should be taken to face such hazardous accidents. Electric shock is another such common accident. It can cause many complications like muscular spasm, internal injury, cardiac arrest and respiratory arrest. A fire plan should also be there to evacuate the workers safely when an explosion occurs.

We all know the fact that accidents are not natural but they are manmade mainly because of their ignorance. So, to minimize such accidents the construction equipment companies should take proper steps and guarantee a safe life to its workers.