Monthly Archives: November 2015

Cat 140H transmission problems

Heavy equipment are prone to some or the other problems. The problems that occur in the heavy equipment can be attributed to more than one factor. You have to make sure that you keep a check at regular intervals on all the factors that ultimately leads to issues in the machine. Other than that, heavy equipment of any popular brand can develop problems over the time. Regular maintenance is very critical and one just can’t skip this important aspect. Though heavy equipment manufacturing companies work hard to produce machines that require less maintenance but it does not make any sense if one demands a machine that should work forever without the need of any maintenance work. It just does not work that way. It has been witnessed that a lot of heavy equipment have issues with their transmission which is considered to be one of the most critical organ in the heavy equipment anatomy.

Operators experience different kinds of problems with the transmission. Issues like the gears are not working properly or even if you change the gears to increase the speed of the machine, it just does not move fast. Well, when someone is experiencing this sort of problem then they should first check if the oil is good and if it is not then it is time to change the oil and then check if things are back in place. People using CAT 140H usually experiences this issue. The change in the gear does not help the machine to move faster. The solution to this problem is to get the side covers removed and clean all the trans-electrical connectors for the solenoids. At times, people are not able to move the gear beyond a certain point. Probably they are not getting the voltage in the coil which leads to this problem. The solution could be changing the coil and check if that works. Most of the time the coil goes bad due to excessive heat and it cause transmission problem.

The other ideal solution when you experience issues with the transmission of CAT 140H is to call up the service center of the company and check if they send their engineers who can fix the issue. However, if you are working in a place where CAT can’t send their engineers then you can try things on your own by going through the user manual. It does speak about various kinds of transmission problems that the machine can encounter and what one needs to do to get it resolved. It is also advisable that you take help of a mechanic who knows how to deal with the issue. User manual does throw light on it but if you are a newbie who does not know how to fix it, you may end up in a bigger mess.

CAT 140H are class machines and they very rarely encounter issues and if the issue is related with the transmission, it may take no time to deal with it but if you are on your own trying few things from the user manual will be a big help.

Related articles across the web

How did they come up with their construction equipment names? i.e. Caterpillar, Hitachi, Case, John Deere

At some point in time in our lives, we must have wondered why the names of heavy equipment manufacturing companies so unusual. For instance, why would someone ever want the name of their company to be caterpillar? Caterpillar is such a small create and why would a heavy equipment company who has big dreams and intend to grow in the coming years would want to keep the name of such a creature. Same goes with the names of other construction equipment manufacturing companies. Names like Case, Hitachi, John Deere etc. are all examples of names that somehow do not seem to fit with the size and fame of the company. But they still have them and are doing absolutely wonderful.

In order to understand why these companies have such strange names, it is important that we take a tour of their histories and try to understand the real meanings of these names.

Caterpillar:-

Let us start with Caterpillar. It is said that this name was given by a company photographer named “Charles Clements”. It was in the year 1925, when Holt Tractor Company the pioneer in the field of heavy equipment merged with Best Tractor Company. It was then that Charles Clements cried loudly that the machine is crawling like a Caterpillar. Since then the name stuck with the company and has eventually formed into one big incorporation.

John Deere:-

When we talk about the John Deere, we actually mean the heavy equipment company that is in the name of John Deere. If we check his history he was an able blacksmith who doing pretty well in the state of Illinois. But he had taken up a challenge of using a better form of equipment to plow the tough prairie soil of Illinois. Therefore, he invented the self-scouring steel plow that made lives comfortable for the farmers of that area. However, it was only in 1837 that he successfully manufactured the first commercial steel plow. He sold that piece of metal to a local farmer who found it extremely convenient and spread the word to more people in the vicinity. He went into a partnership but that did not last long and had to come out of it. Things did not stop for him there and he continued his good work thereby producing more of such machines. He was of the belief that he will produce the best of machines for his consumers. Eventually in 1868, he incorporated his company.

Hitachi:-

Like many others, Hitachi also has an interesting story behind its name. It was founded in 1910 by Namihei Odaira. He was an electrical engineer by profession. The product that the company manufactured for the first time was an electric induction motor that was predominantly used for mining copper. The company started with its operation in a mining company located in Hitachi, Ibaraki. The name “Hitachi” also means “Sunrise”. This is how they stuck to the name of Hitachi and from there they started their journey from selling hard disk drive subsidiary to construction equipment to all over the world.

Keep yourself ready for challenges in the construction sector

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Generally, we are surrounded with different sorts of opportunities and challenges. To be specific, we can regard ever challenge as a form of an opportunity because the moment you take up the challenge in life and are able to surpass it that turns out to be an opportunity for you. It is equally important to understand if you should be able to accept the challenge or not. Know your strengths well before you take up any challenge because in case if you are not able to achieve it, it can even break you from within. It has been observed that people who are linked with the construction business suffer big time after having taken up a challenge that they were not suitable enough to fulfill. They realize this later but by that time things have already gone awry for them and they could not convert that challenge into an opportunity for them.

Keeping yourself ready for challenges is an art that one needs to learn and slowly master it. It can’t be taught nor can it be learned in a day. You first take time to understand what you are getting involved in and once you know that this risk is worth taking that you should go any further with it.

Keep your temptations at check:-

It is crucial that you do not fall for offers that are too good to get. You may even get offers that are huge and have many people involved in it. Huge offers are often tempting and it draws you more towards it but you should be wise enough to analyze your benefits and the cost you are paying to get that offer. Oh yes, there will be a cost attached to it. It will not come to you for free. Therefore, before you take up the offer, understand your risk that is involved in the trade and the possible threats attached with it. Since there will be more construction companies attached with the project, you need to understand the role of your company and the share you would be drawing. It should not happen that some other company puts the blame of their wrongdoings on your work. You also have to check how good your rapport with the other companies is. If you share an excellent relationship with them, then there is no problem with going for the deal but in case if you see people whom you do not like or who do not like you, it is better that you do not get yourself involved with it.

Always set up a back-up plan:-

A back-up plan is a much needed aspect when you are dealing with important projects that have severe financial implications on a company. In case if anything goes wrong with the preliminary plan, then the back-up plan can always be used to safeguard your interests and also ensure that the project is on line. You can encounter any form of challenge when you are dealing with an important project and being ready for it will only display your seriousness towards your work and your ambitions in life.