Monthly Archives: April 2018

Construction of manufacturing units and factories

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

When we talk about construction, it need not necessarily be of huge buildings or condominiums. The word in itself is quite elaborative. When you are in the construction business you deal with building anything and everything. Although you take time to learn the industry and the different ways by which you can acquire projects. You also take time to understand how to complete a project within the stipulated timeframe. Well you learn these things from experience and as and when you get to deal with them. Construction companies make enormous profits when they get into a project that is pertaining to building manufacturing units and factories. When you are into construction of manufacturing units or factories, you are catering a particular genre of client and therefore you got to pay special attention to their demands. Their demands are quite specific and you got to channelize your resources based on their specifications.

Understand what kind of factory you have to construct:-

While constructing a factory, you need to understand that the requirements are quite different for every factory. So for instance, if you have loads of experience in constructing factories or manufacturing units, you can’t be sure that you know what your current client need from you. You may definitely have an edge over others if you are experienced in constructing manufacturing units but it is advisable that you sit along with your client and try to understand their needs. Check out the kind of set up they want and on that basis you can frame the designs.

Show the progress at regular intervals:-

It is imperative that you keep updating your client on the progress of work. Remember, while constructing manufacturing units, you have very less scope to alter things once they are been built. You should ask your client to visit the site on a monthly basis and check the progress of work on their own. You should try to stick to the design so that if there requires any alteration in the actual building you do not have to do it out from your pocket. Your client should ideally pay for it. However, it is not mandatory for the client to pay for any alterations. If it is a mild one where you know it will not affect the costing of the company massively, you can alter the stuff without charging extra. This will eventually make your customer happy.

Use top notch equipment:-

You always have an option when it comes to using equipment to work on a project. It is always preferred to use top notch equipment. It will ease the process of work and will also take comparatively lesser time. With top notch equipment, one should not imply using brand new machines and accessories. It simply implies using mechanisms that are scientifically proven to be an easy tool to work.

Construction of manufacturing units and factories gives enough scope to construction companies to earn good sum of money. However, the construction companies should be ready to take such projects and complete them in time.

Line boring heavy equipment

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Drilling a hole to lay a foundation is quite an intrinsic part in the construction sector and the holes dug for the foundation has to be precise as designed by the civil engineer. You can’t mess up with such an important stuff because if you do then it directly affects the quality of the construction. It is therefore crucial to select the right type of heavy equipment and also the right kind of cutting tool. The cutting tool needs to be attached to the heavy equipment and then begin the process to bore the ground. Now the cutting tool can be a single point or can have multiple heads. Each type of tool is used for different kind of boring. As no 2 boring is the same, you can’t use the same cutting tool for every type of boring. While fitting the boring bar one must ensure that both the ends are firmly supported and it works only in case of a through hole.

The challenge that people encounter while boring is that there are immense chances of the boring bar to get disconnected from the machine. Though both the ends of the heavy equipment has caught the bar firmly there are still lot of chances of it coming out during the process of boring. This is the reason why it is considered to be more challenging than turning. Other than this the clearance angle requirement has been increased which has made things more difficult for the operator. It actually limits the kind of support that should be given to the cutting edge and makes it more vulnerable. You can use a line boring tool in almost all kind of heavy equipment. Be it a dozer or an excavator or a backhoe loader, it goes with all kinds of heavy equipments.

Operators who are working with line boring need to be highly expertise in their respective domain. Since the holding capacity of the heavy equipment is not that great it can pose good deal of problems to inspect the work already done which includes understanding the size of the hole and the surface roughness. Therefore the need of expert operators arises. The operators need to know his matters well. Apart from laying foundation which is one of its core work area, line boring it extensively used for many other purposes and this is why the guy needs to be really sharp with his skills.

With the advent of portable boring, life has become a bit simpler for people who take boring contracts at far-fetched places. They do not have to load the boring bar in a truck or a big vehicle. All they can do is put it in back of their car and port it to the next destination. The reviews of portable line boring tool have been awesome. It is just that the hole need timely repairs. Line boring cutting tool can be bought directly from a dealer or online. Do some research on the pricing before you go to buy one.

Foresightedness is a pre-requisite in the construction business

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

For any business to thrive, the managers of the business should possess the quality to foresee things. They should be in a position to anticipate what may happen next. An important decision taken by them can have certain ramifications. This should be construed well in advance by the people who are responsible for the growth of the company. Businesses that are volatile in nature are more prone to risks and if the business owner is not careful about his decisions, he may have to pay a heavy price for it. We normally take decisions taking into account in current situation. We do not know the future and therefore it is quite difficult to assume things in advance. We can however assume few things if not all. People who have been running the business for long, they kind of get a hang of different situations and are somehow in a position to predict things. It is perhaps they have witnessed similar things in the past.

The current situation may be a little different from what the person must have witnessed years ago but he can still assume the result and can plan his stuff accordingly. To run a construction business, one requires great deal of experience in hand and apart from that, the capability to foresee things. There is significant amount of volatility in this business. During turbulent times, small construction business owners do not have to face the music as much as the big companies have to. They really see a sharp decline in the graph of the company which is only because they were not able to foresee those turbulent time in advance. You get hints before a major catastrophe hits your business. You need to understand those hints and frame your strategy accordingly. Failing to act at the right time can even cost you your business.

Rise in the price of raw materials and fuel:-

Though both raw materials and fuel prices do not rise at the same time; however, if either of this happens and you have not stocked them, it can cost you heavily. Now, no one can assume when the price of either of them will increase. This is just not possible. However, one can predict the rise through means of what is happening in the market, keeping an update of the government policies and other factors. The crux here is how knowledgeable you are with the current affairs. If you possess sharp knowledge and the information that you get is correct, then your assumption can never go wrong. There may be a slight miscalculation where you have predicted an “X” amount of increase but it only rose to “Y” amount. That is understandable.

Prepare statistics to understand the position:-

You have plenty of softwares which you can use to prepare statistics based on the information that you get from your sources as well as from business magazines. These statistics will help you to come to a conclusion on where the construction sector is moving and will eventually lead you to foresee or predict a thing.

 

How to choose the right Heavy Equipment for Storm Clean-up

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Climate is not in human control and natural calamities can strike in at any point, without any prior indication. However, nowadays, due to technological advancements, weather and climate changes can be predicted well in advance, and this gives us some scope for prevention or at least precaution. But, in front of huge natural calamities like tornado, hurricane and other storms, there is nothing that we could do.

Damages are also huge as caused by these storms. Not just these cyclones and tornadoes, but the snow storm can also cause great disaster. Even earthquakes can strike in anytime and the results are disastrous. What is a common consequence of any of any of these natural disasters is the huge amount of debris that needs to be cleared, after the calamity.

Heavy Equipment in Cleaning Up:

From uprooted trees to broken down buildings, roofs, damaged roads with concrete and mud, dust and dirt everywhere, it becomes absolutely difficult to get back to the daily lifestyle. Even after a snow storm, the amount of snow that is deposited on the roads, block the roads completely. Hence, to clean them up, the heavy equipment plays a huge role.

Types of Heavy Equipment Needed for Storm clean-up:

The damages that take place after a storm vary to a great extent. The houses, concrete buildings, might structures and even the huts collapse. In case of the roads, they are severely damaged by the amount of downpour that follows the storm. The pitch, bitumen and asphalt, come out of the road. The trees are uprooted and they block the roads and this makes it even more difficult to communicate. To clean the debris and to make everything just as usual, there are a few types of heavy equipment that must be needed. These would include –

  • Excavators
  • Track loaders
  • Dozers
  • Cranes
  • Wheel loaders
  • Backhoes
  • Dump trucks.

Each of these would serve a special purpose while performing the cleaning task after storm damage.

Choosing the right equipment:

Now that you have known about the different types of heavy equipment that you need to choose in order to clean-up the storm damages and debris, you must know the factors that you need to consider while buying or hiring them.

  • Type of damage:

This is the most important factor that you must consider. The type of damage that has been caused by the storm is the most important thing. You need to decide, whether you need to clean the snow or remove the tree logs or clean the debris.

  • Own or hire:

The next most important thing is whether you need to own the heavy equipment or hire them. If the storm attacks your area frequently, you can choose to own the equipment. Or else, you can even hire them as you require. Owning might charge you high initially, but it will reduce the hiring cost every time. You can even rent it out, when you are not in need of it. It will be an added income to you.

Since the use of the heavy equipment is diverse and versatile, they are always in demand.

High attrition can have a larger impact on construction projects

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

In a construction business, employees from different departments play a crucial role in the overall development of the project. You want the project to end on time; you need to ensure that you have you men/women by your side and if that is there you can end up completing it within the given deadline. However, if your men/women leave the company for any reason the prospect of the project ending on time gets jeopardized. This is why it is so important to ensure that the attrition rate of a construction business is low. You got to take good care of your employees and see that they do not leave the company for any silly reasons. Reasons can be tackled and settled by sitting together and having a discussion. This is precisely the task of the management would be. They need to talk to the lot who are disgruntled from some reason or the other and try to root out the issue from its core.

Skilled men/women get jobs easily:-

People who work as unskilled laborer may have a hard time getting another job if they ever want to leave their existing one but for the ones who are skilled it is never a problem for them. The construction workers who are skilled and experienced are required in good numbers by any construction company or contractors and therefore their exit from your company is in a way can be looked at some kind of loss to the company. It can have a larger impact on the company if you do not manage to get a replacement in time and getting a replacement is one big challenge. The focus should therefore be on retaining your folks. Try and understand the core issue why they want to quit. This will help you know if others also have similar issues and if they have then that can be rooted out right at the beginning.

Projects are delayed due to lack of manpower:-

Crunch in manpower can be a significant problem for any industry and when it is about construction it can have a devastating effect on the project. There are numerous projects that are halted due to lack of workers or just because they have no workers at all. This is certainly not a good picture to portray. It shows how ineffective the management is that they can’t hold back their workers who play such a crucial role in the company. This can also have an impact on getting future projects. This all works in a circle and hence you got to get your things right from the very moment you sense trouble.

Boost the morale of the workers by giving awards:-

Giving awards and rewards should be a regular affair in your company. The management should pick the worthy employees and give them some kind of gift cards or cash prize or incentives every quarter. Please note that you do not pick the same guy/gal every time. Try to pick talents from various departments and give them their prizes. You can even do this with the contract laborers. This will motivate the employees and will bring down the attrition.