Operators views on new Caterpillar graders

Graders have always been the best choice amongst most of the operators who are been assigned the task to remove debris from a construction site. They see this as a difficult task only because it is hard to break down the debris that has formed a solid state by now and then load them in the truck. Also for operators who work in a dump yard where ultimately all the debris are unwanted wastages are finally dumped, they see the work to breaking down the wastages are a tough nut to crack. However, if they are given the right sort of heavy equipment then perhaps they might find some solace. Ideally, they demand for the right machine because they can’t perform to their full potential if they are given machines that are not meant to do that kind of work and most of the time they demand for Graders for this kind of job.

Some operators are quite selective with the brand of machine they will work on. No wonder these operators have loads of experience under their belt and they know what they are asking for. It has been observed that such operators demand for CAT graders as they find it to be far more reliable and easy to work with. One must understand that operators want to work on machines that provide them with ample of comfort and space.

They do not want to slog for every small thing and want the machine to take care of most of the production part. Other than comfort they also look for convenience as they believe that heavy equipment should provide the required convenience to the operators who otherwise have to go through an ordeal on the site. Removing debris and managing the dirt is quite a task and not many want to venture into it. It is perhaps the experienced ones who take up the challenge and hence their demand for a machine of their choice is absolutely justified.

The height of the machine to the top of the cabin is around 11 ft in which means that it provides ample space to the guy inside and also allows him to move freely without getting hit by other significant gadgets. The M-series gadgets of CAT graders are termed to be phenomenal by industry experts and also been rated as one of the best as compared with the rest of the series. Operators also face a hard time with the various functions in the machine. The modern day graders are equipped with state of the art features which makes grading work simple. However, CAT makers have ensured that they keep the functions as simple as they can so that the operators to get a hang of it within few hours.

Most of the features in the M-series grader are controlled with a joystick and there are few other buttons that are used to move the machine and its accessories. However, it does not take enough time of the operator to understand those levers and work his way. Overall, most of the operators have appreciated CAT graders and has kept it at the top of their demand list.

Buy Now on eBay [ebayfeedsforwordpress feed=”” items=”5″]

Earthquake damage clean-up services with heavy equipment!

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Earthquakes can be disastrous and destroy a large area within just a few seconds. As the Richter scale strikes high, the consequences are so severe that it takes months or sometimes years to repair the damages and losses. However, what needs to be done almost as an emergency resort is to clean the debris and rubble that is caused by the earthquake. But, it is not the job of the humans to clean the rubble and debris manually. What helps in this task is the heavy equipment.

There are special earthquake management and clean-up heavy equipment that are used in this task. They are designed to do a number of tasks in order to manage the earthquake damages.

Removing the rubble:

Rubble of stones, concrete and bricks that are scattered everywhere on the roads from the demolished buildings as a consequence of earthquake, needs to be cleaned at once. This is very important as surviving creatures; humans might get trapped underneath the rubble.

There are excavators and loaders that help in removing the rubble. These come in different types. Some have tongs in the front that help in lifting and picking up the huge pieces of rubble, so that the task is done faster.

Sorting out the rubble:

After an earthquake, the rubble and debris that is deposited, contains different kinds of elements. These include wood, electronic devices like television sets, computer, refrigerator, air conditioners and so many such things. There are also the kitchen appliances that need to be separated. The concrete, stones and bricks need to be separated from the electronic devices. In fact, the wooden furniture, doors and window frames etc. should be separated as well.

The reason behind this is recycling. Such huge amounts of the rubble that is cleared up from the zone, cannot be dumped together anywhere. Hence, recycling is a must. There are equipment that help in sorting out the rubble.

Metal cutters:

Metal cutters are very important in the cleaning process after an earthquake, the aluminium, steel and iron sheets that are used in various structures and constructions, need to be cut in order to remove them. It might not be possible to move them as it is. The heavy equipment that helps in cutting the metal should be used in that case.

However, one thing that needs special mention here is that the heavy equipment that helps in the task of removing the debris and cleaning up the area that has been struck by an earthquake or some such other natural disaster might not be available to everyone. It is therefore important that you buy or hire them from a dealer.

The dealers always have these types of heavy equipment available. You can also choose the used equipment as they are available for an affordable price, regardless to mention the heavy equipment is not cheap. But of course, if you are a service company that offers earthquake or storm damage clean-up services, owning the heavy equipment is a must. It will help you to provide fast services, which is a must in these cases.

 

Renting a backhoe loader

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

If you have an asset which you are not using and that can be rented should be let-out without giving much thought. The reason is if you just keep the asset with you and do not use it, with the passage of time it will wear out. This means that you do not gain anything from it and you are slowly losing out on an asset. This makes absolutely no sense. In the construction business there are many small construction companies as well as contractors who are in hunt of heavy equipment and are ready to give a good rental price if they get something worthy. So for instance, if you own a machine and you do not see any use of it in your business for the next many years then it just does not make any sense to keep it with you. You end up paying a good price to maintain the machine which you will not use for many years.

Backhoe loader is one such heavy equipment that is known for its sheer quality and high class performance. Therefore renting a backhoe loader can always assure you good returns. All that you need to ensure is that you keep the loader in good state. Keep the machine well maintained till the time it is there with you and you have put it to some use. Also before you list the machine for rent, make sure that it is up and running. Try to take some help of a mechanic. He can fix the loader if at all it has any issues. Moreover, you should paint the machine and make it look new. We all want to acquire new things in our lives. So what if the next guy will own it for few months, it will still prefer to take it once it is painted and it looks new.

Use online platforms:-

Listing the backhoe loader on an online platform is perhaps one of the best options you can use. There are number of websites that deals with selling and renting machinery online. Right from an air condition to a car, you can find everything online. You have to first become a member of one such website. Take some pictures of the loader and post it on the website. Give a brief description of the machine like since how long you hold the machine, if it has gone through any minor or major accidents or have you recently changed any of its parts and things thereon. This information will be handy for the viewer and will help them to decide if they should go for your stuff.

Do not quote a high price for an old loader:-

You should be very careful while you quote the price of the backhoe loader. If at all the machine is old and has been repaired several times, you should quote a lesser price for the item. The taker should not feel cheated or else it can lead to further complications. It will be a waste of time to get into such unwanted situations.

Expert opinions matters a lot when it comes to safety of heavy equipment

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

When you are dealing with an important thing that can make or break your business, you should depend on the advices of the experts. When it comes to heavy equipment, you got to be all the more cautious while dealing with it. Heavy equipment are highly expensive items and you need to be double sure before you do anything that you have not tried afore. It is always advisable that you take the opinions of an expert for everything that you are not sure of. The real problem is how we know a person is an expert in the field of heavy equipment. We can’t really determine that but there are few things that we can follow.

Take advice from experienced people:-

People who are dealing with heavy equipment for the last many years will be in a position to understand your issue and may give you a valuable suggestion. They may have seen several instances and have found a way to get pass through those issues. These experiences of theirs really counts and it will be prudent to put your queries to them. In case, if they do not know the answer, they will at least not misguide you by giving incorrect details. On the other hand, they will check about the particular scenario from someone else and then will get back to you. Alternatively, if you have a mentor in the construction industry or a person who is an expert mechanic can also come handy.

Post your question on the net:-

This is another option you can avail to get your answer on heavy equipment. Here you will get multiple suggestions and opinions of people belonging to this industry for years. All you have to do is put your question on your site (if you have one) and then wait for people to comment on it. You can also ask people to register on your site so that they can often come to your site and give their say on a new topic. In case you do not have your website, you can become a member on someone else’s website and post your question there. The effect will be the same. People who know about the subject will speak on it and shall also provide a link of a website for you to go through. This will save your time to browse the net and search for the topic of your interest. You directly can go to the site and get your queries answered.

Operators can be a big help:-

In case you are having an issue with your equipment and you do not know whom to reach for help, you can take help from the operator of your machine. Operators are the one who work all the time on your machine and therefore can offer you a piece of their mind. Simultaneously, one should also upgrade his knowledge on heavy equipment if they have to regularly deal with it. Nevertheless, an expert opinion always matter in keeping the heavy equipment hearty and healthy.

Utility of user manual towards fixing heavy equipment

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Heavy equipment owners perceive calling a mechanic equal to a nightmare especially when they do not have any collaboration with a specific mechanic to fix their heavy equipment. Machines are bound to have issues and it is the onus of the owners to get it fixed. Not having enough knowledge to repair the heavy equipment can have a backlash on their work. Finding a good mechanic has already been a big problem and on top of that they can’t sit with the unrepaired machine for days as it is clearly affecting the productivity of the company. In this situation if something that can really come to their rescue is the user guide which is also known as user manual. The user manual has everything that a person needs to know about his heavy equipment. It talks in detail about the machine and what one needs to do to keep the machine in good health. So the first thing that the owner of a heavy equipment needs to do is go through the user manual and try to understand what is written in it.

Initially he might find it difficult to understand what is written in the manual. He may see a lot of jargons in it but after going through it carefully he may get a hang on it and will gradually understand the language. Other than that if a person who is familiar to heavy equipment will not find understanding the user manual a mammoth task and will be able to comprehend the stuff written in it quite easily. The responsibility of repairing a machine falls more on the operator as he is the person who stays connected with the machine for most of the time. So if anything goes wrong with it, the onus straightaway falls on him. The user manual in such an instance proves to be quite helpful. He only needs to know the problem and can look for the solution in the book.

In situations where the heavy equipment has a major repair problem, the user manual may not be so helpful. At that time you have to get hold of a mechanic to fix the problem. Though the repair process will be mentioned in the user guide but it also requires experience of a person to fix a problem. One can’t just refer a book to find solution to the entire problem and have to depend upon a person’s experience as well. The user manual is quite helpful when it comes to solving minor issues and it also talks about the way one should be handling the machine. For instance, how frequent should one change the engine oil and how often one should clean the machine is all mentioned in the guide. It is just that one needs to follow the stuffs written on it religiously to ensure that their machine is productive and efficient.

In a nutshell one can take help of the user manual to fix any minor issues related to the heavy equipment and not have to depend on a mechanic for every small needs.

How profitable the construction industry is

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Many people are willing to be a part of the construction industry knowing how difficult it is to sustain in such a competitive environment. The reason that is flocking people to this industry is the chance of earning good income in comparatively lesser period of time. Today people are ready to take chances. They feel that in order to earn more you got to take some amount of risk in life and construction industry is all about risk and high income. However, a person should know his risk taking appetite or else he can land into a big mess which can even result him in winding up his business. There are numerous such instances where people have lost whatever they have earned by taking one miscalculated move which proved to be very costly to them. For some it resulted to selling their business assets and removing employees through means of cost cutting and for the rest it was more terrible. They had to shut down their business and were looking for something new.

For people who are ready to take the challenge and the various ups and downs of the business, they are in the game. You should know to strive and survive in this business. You will be hit by lot of forces that may compel you to back off but it is ultimately your character that will keep you going. There are also stories of individuals who had started from scratch and are now in the riches of the industry. They took the challenge after carefully scrutinizing if they will be able to take it on. They also took their chances but their chances were more calculated than others who failed miserably in this business. The one who were able to survive the tide made enormous wealth for themselves and also for their stakeholders.

Invest money for new projects:-

You can make millions if you hit the right note at the right time. For instance, buying repossessed heavy equipment at a comparatively lesser price, buying raw materials from guys who are new to the business and constructing a building on a land that has clear title are few of the facts that one should indulge in to earn more. By buying heavy equipment and raw materials at a lesser price you simply lessen the operating cost to the company and constructing apartments in a clear title will ensure smooth functioning without any legal hassles coming your way. Apparently, you will be able to invest your money that you earned through profits on newer projects. The thumb rule is never keep the money idle. It is advised to reinvest the business profits into expansion by keeping aside a sizable portion as contingency.

Try to maintain a profit percentage of 9% to 11%:-

Ideally for contractors who take contracts to build homes for buyers, they should assume a profit of around 9% to 11%. The profit percentage is excluding all other operating cost that goes into building a house. In other words, it is the net profit that one should expect to earn after paying all legal charges and fees. The contractor should have this figure into consideration while giving a quote to the buyer.

Highway construction with excavators

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Construction industry requires different types of heavy equipment for various types of works. They can’t limit their use to just one kind of machine for all the work. They have to bring in different heavy equipment that are capable of doing certain specialized work. For instance, you can’t make use of a loader for grading purpose. You have to use a grader for that work. Simultaneously, you can’t use any heavy equipment other than a water truck to spray water on the jobsite to contain the dust on the site. In the same way, when you are constructing a highway there are few heavy equipments that you need the most; without which you just can’t get the act right. You need a roller to crush the stuffs and make the road smooth and plain. Similarly, you also need an excavator at the beginning of the highway construction. Perhaps it all starts with an excavator which comes in handy for lot many activities.

A crawler excavator is perhaps the best heavy equipment that a contractor who engages in highway construction can have. A crawler excavator is quite similar to any other excavator which is exclusively used for excavating earth and rock and then loading them onto dump trucks. It basically has a boom which is attached to the front of the machine. At the end of the book, you will have a bucket with or without claws which is extensively used to pull out mud. The cabin in which the operator sits and operates the machine is just right above the undercarriage and is set on a rotating platform. The undercarriage of the machine has wheels or tracks which help the machine to move without losing grip. The attachment in a crawler excavator can be changed as per the requirement of the business. This means that you can now select from a range of options of attachments that you feel will get the work completed in lesser time.

The operator working on the excavator should be highly skilled and experienced as you can’t have someone who has little or no experience in highway construction. Operators who have worked for at least 5 years in constructing small roads can be signed up for highway construction. They should be under the supervision of senior operators who have loads of experience in constructing highways. Constructing highways is a tough job and it takes years for operators to clear the ground for the next level.

A contractor who has taken up the job of excavating should have more than 3 excavators working at a time on the site. They should set up a point till where the excavation work will be carried out and also a deadline should be given to the operators to make sure that the work is done within the given timeframe. Excavating work should be done in a phased manner and not dig up the entire place at one go. Once the excavating work is done, it should pave way for other machines to complete their part of job.

Periodical trainings may help employees to perform better

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

It is perhaps not heavy equipment but the human resource that plays a pivotal role in the making of any successful business. The employees of a company can shoot their productivity to a new level if they are happy and content with the treatment that they get by the company and also by their bosses. The role of the management will be to ensure that the employees are well trained and can complete their work with utter accuracy. In an industry like construction, the role of the workers is very crucial. Right from the laborer to the civil engineer, they all require adequate training to understand what they are doing and how crucial their role is in the company. This also gives them a sense of importance and they take up their responsibility quite seriously. Even the guys who sit at the top require training on how to handle the labor force. The guys in the management have a bigger role to play in the overall performance of the company.

Construction laborers once they go skilled get ample of opportunity in almost any construction company. It therefore becomes the responsibility of the management to ensure that the guys do not leave the company for trivial reasons. Now to lower the attrition is a challenge that many top level managers find difficult to counter. In a construction business, it is not just the labor but there are many other people who hold such important departments that make the job of the top level managers tougher to hold them back. This is where their training comes into picture. These guys should be trained on a periodical basis on how to handle the vast labor force and ensure that they do not leave the company and stay productive. Keeping everybody happy is a difficult task and also requires lot of skill. The top level managers should be trained to acquire those skills and keep the guys happy.

Training the staff is another crucial segment that should not be skipped at any cost. The people from the Admin, HR and other such crucial departments should first understand the importance that the department holds and the positive impact that they can have on the people belonging to other departments. They should then be trained on how effectively they can make the working atmosphere in the company livelier. Organizing a small function or a health camp right on the jobsite can have a huge impact on the workers. The guys should be trained to come up with innovative ideas and put them to effect.

Lastly the laborers should be trained regularly on issues like health and safety. These are probably the most neglected areas that should be addressed. The trainings should be scheduled once every fortnight or once in a month and the attendance of all the employees should be mandatory. The employees will learn many things in this process that will help them to grow as a person and also in their career.

How do I find an Equipment Appraisal Service?

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Before you buy a used item you want to be sure about the price of the item that is being quoted by the seller. You just can’t pay any price for an item that is not even new. So how do you come to the point where you know the approximate price of the item? Well it is the appraisal company who does an appraisal on the item where they go through a lot of things in order to ensure that the price of the item that they appraise is correct. For every high priced item that has a sales value, we need an appraisal to be done on that commodity. Real estate is one such commodity. Before you sell a property it needs to be appraised.

It is the law that each one has to follow. Simultaneously when it comes to heavy equipment you need to get the appraisal done and once the appraisal agent determines an approximate price of the item, the seller needs to quote a price that revolves around the appraised price and sellers prefer to keep the price of the machine mostly below the appraised price. So the crux for the seller of heavy equipment is to locate an appraisal service agent who appraises the value of heavy equipment. In other words, you can’t go to an appraiser who is into appraising the value of real estate and ask him to do an appraisal of your construction machines.

Check on internet:-

To find an appraisal agent is not at all a tough job in today’s time. All you need to do is log into your internet and key in what you are looking for. You will be flooded with alternatives and then you got to pick the best alternative. There you have to do a bit of research. You need to check each websites individually and understand which appraisal service will be the best for you. You can check the reviews left by people who have used their services. This could be really helpful for you to take a decision. People believe in sharing their experiences on the net and whatever may be their experience they will put it out there for everyone to see. Go through the reviews carefully and apply your rationale to take a decision. You should go through maximum 5 appraisal companies reviews and try to take a call from that. Too many alternatives can also confuse you and your decision making ability can go for a toss.

Check with someone in your business circle:-

If you do not find a good appraiser on the internet and if your are the person who believes to follow more “word of mouth” then the best option is to check with guys in your business circle. We all buy and sell heavy equipment and before we sell any we need to get that appraised. All you have to do is check with someone who has recently sold heavy equipment. Once you know that you can easily know the name of the appraisal company. You can also know the person’s experience with the Appraisal Company which will help you to take a call.

Heavy equipment salesman should not run after commission

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Sales jobs are one of the most lucrative jobs that is always available and in demand in almost every field or industry. If you are good in sales and can achieve huge sales targets easily, you will surely flourish in your career. What makes most of the sales jobs so much popular is huge amount of commission that you are offered for every sale that you make.

This is exceptionally popular for selling the expensive goods such as the heavy construction equipment. The heavy construction equipment or vehicles are one of those things that can fetch a good deal of profit from a single sell, due to the high price of the vehicles. Hence, the sellers almost always can afford to provide commissions for the sale of these vehicles or equipment.

Why should you not run after commissions?

Often, commissions are considered to be a motivating factor behind increasing sales. However, the fact in reality is that these commissions do not motivate the salesmen at all. With every single commission promise, comes a high target of sales that the salesmen have to achieve. If they do not achieve the sales, they are not given the commission. Hence, they do not feel “motivated” with this commission; rather they feel burdened with this huge target that they have to achieve.

But, heavy construction equipment or vehicles are something that is not something easy to sell. These are quite expensive and unless it is a large construction business, there is very little chance that the equipment will be sold frequently. Moreover, the longevity of the heavy construction equipment is extremely high and they do not get damaged easily. Due to this reason, the scope of sales of the heavy construction equipment such as a hydraulic crane, a mixing machine, scissor lifts, pavers, excavators, loaders etc. is limited.

What should be the alternative?

As already mentioned, with sales commissions, comes the target or burden of high sales results, this actually disturbs the mood for good business. Hence, those, who are looking for a job as a salesman in a heavy equipment selling company, should not run after a commission. The aim should not be to gain maximum income from commissions; rather it should be on how to become a better salesman.

For that you need to focus more on the knowledge of increasing sales in your field. With more interest in the vehicle or equipment that you sell and with more focus on how the customers would be benefited by the heavy construction equipment, the sales would be increased. The sellers or the businesses should also concentrate more on hiring the skilled heavy equipment salesmen and not hire anyone, who is looking for a commission, without having the skills for selling the equipment. Businesses will gain more profit from good or skilled sellers; rather than by setting targets for new salesmen and promising to give them commissions for the number of sales that they make in every month or in a given period of time.