Category Archives: construction equipment

Running A Motor Grader- Know the Basics

Being involved in the construction industry and not having to deal with heavy construction equipment is like learning to swim without getting wet- in short, impossible. And when these equipment are so important a part of the entire business, it is only best to be aware of certain basic aspects first. Among the many heavy equipment that are put to use in the construction forum, the motor grader definitely qualifies as being one of the most important.

Getting To Know a Motor Grader

If you are into the arena of construction, then you need to be well aware of what a motor grader is all about. Also known as the road grader, the motor grader forms an important part of particularly the road construction industry. Used for the purpose of creating a flat surface during the process of grading, a typical motor grader has an engine and a cab positioned over the two rear axles and another axle at the front of the equipment. You must have noticed that before a road is covered with asphalt, the dirt is graded and smoothed over for the final layering. The equipment which flattens the surface and makes it ready for the final asphalt covering is the motor grader.

The Basics of Operating a Motor Grader

The construction of a good road largely depends on how well the base for laying the asphalt has been created. And for the base to turn out good, it is important to operate motor graders in a proper manner.

  • The very first thing that a motor grade operator needs to keep in mind with respect to the operation of the heavy equipment is performing the safety checks before starting a day with the grader. Make sure that the motor grader is in perfect working condition and none of the parts are faulty.
  • It is important to have the gear of the motor grader in the perfect position for the work to proceed smoothly. It is wise if you do not move too fast with the grader, keeping it under control for overall safety and for having quality results.
  • The correct way of operating the controls is another aspect that operators should pay attention to. There are two levels in the middle that help in operating the rotation of the blade. This is important, as it is the proper angling of the blades that will help you in locating the exact place where the debris are to be moved. These levels also help in circle shifts that are actually responsible for the rotation of the blades. Operators can also make use of the blade shift control in order to set the direction of the blade.
  • The operators also have to ensure that the blades do not hit and damage the tires in any way while the rotation is on.
  • There is also the fact that motor graders require different blades in order to fulfil different jobs. It is the duty of the operators to understand which blade would be suitable for the job at hand and then proceed accordingly.

Like any other heavy equipment, operating motor graders also require a professional hand at work. However, getting to know the basic aspects of the entire deal wouldn’t be too bad either.

 

Check out the list of some useful attachments of heavy equipment

There are many names of heavy equipment, another name of such equipment are earthmoving equipment. The name of such equipment makes it clear that these are very heavy and also can handle many functions at a single time. Skid steer also is a very flexible handy and adaptable piece of heavy equipment machine. It also has some other names like slide loader or slide steer loader etc. The skid steer is very much similar to a small sized excavator and this machine can perform various types of tasks.

The skid steer is considered as the most versatile and also unique machine and the main reason behind this is its capability to move different kinds of heavy equipment through its attachments. These attachments are made to perform many specialized tasks.

Check out the list of the skid steer attachments and also the tasks that they actually perform

  • Dozer blades: This is a very useful attachment for grading, reshaping or pushing purposes.
  • Hydraulic spreader: This attachment is used for spreading sand or salt on ice during winter seasons and in summer it helps to spread grass, fertilizer and grains.
  • Backhoe attachment:  It is a very useful machine and it helps to perform tasks related to excavation.
  • Bucket sweeper: It also helps to perform many tasks especially the heavy cleaning tasks. The other name of this attachment is angled broom.
  • Hydraulic breaker: Through hydraulic breaker people are able to break some harder materials like rocks and concrete.

There are some other attachments also that are used to perform several other works like demolition, truck loading and fence-hole drill.

  • Trencher attachments: This attachment is used to digging trenches ‘ranging from two – six feet deep’.
  • Pallet Forks: This attachment helps pick up pipe and pallets.
  • Pallet box rake: This attachment helps to tear up the grasses which are older and also help to remove debris and stones from field at the same time.

The above attachments are very popular as you can see such attachments during the time of road construction or even for tree clearing operation and other various operations. In this modern era where people experience development every day, you also can see new attachments with the help of technology and such attachments will work faster.  Some modern techniques also will be invented in order to operate such attachments easily.

You have to make sure that whether all the attachments are lowered or not. If you are using a bulldozer or backhoe then you should put down all the arms and blades. When you will shut down your machine then you should also carefully notice that whether these attachments are secured or not. People use heavy straps, a chain or thick rubber bands along with a hook to secure the attachments. In order to move your equipment you need to secure all the attachments very carefully.

Participating In a Heavy Construction Equipment Expo? Explore All the Associated Facets First

Does your client/ customer base need a boost? Are you looking for a platform from where you can launch your new product? If yes, then the heavy construction equipment expos can be just the thing you have been looking for.

What Is Meant By A Heavy Construction Equipment Expo?

If one has to define the term heavy construction expo, it can be said to be just another exhibition or fair, the participants of which are different construction equipment companies. It is a platform where various construction industries can interact with each other along with increasing and enhancing business relations and strengthening the client/ customer base.

How Can Heavy Construction Equipment Be Beneficial?

Construction equipment expos or trade shows aren’t anymore restricted to the acquiring of leads and looking out for potential customers. They serve a lot of other purposes as well. So, what are the other advantages involved in the entire deal?

  • Participating in such exhibitions leads to the much needed exposure for your organization. Not only will you be able to make a lot of new contacts, these expos are also a great way of increasing your network as well as getting embedded in the networks of the others. And of course, this means increased sales and profit for your company.
  • Since heavy construction equipment expos provides a platform for many construction organizations to showcase their products, it is quite obvious that customers visiting these fairs will have more options with respect to the makes, prices, pros and cons of the products. Construction organizations, too, get the opportunity of showcasing their products to a greater number of customers, thereby, enhancing their customer base.
  • For the customers, these heavy construction equipments exhibitions are a way of getting out of the accustomed brand circle and explore other alternatives. Therefore, it goes without saying that this is one hell of an opportunity for those organizations that are looking to create their brand. In fact, these expos form a great way to launch new companies and products in the construction market.

What Are The Factors That Construction Companies Have To Keep In Mind Before They Participate In Such A Fair?

Now that we are well acquainted with the entire purpose and advantages that the entire deal of the heavy construction expo has got to offer, let us look at those factors that should govern the decision of your participation.

  • Make sure that the exhibition venue has enough space for showcasing the heavy equipment as your participation can be fruitful only if you have been successful in showcasing your heavy equipment.
  • Also ensure that you have enough resources to put up a demo if required for customers will want to ensure that they will be profitable if they invest into the equipment.
  • The location of the venue should also play an important factor in your decision. Make sure that the expo is located at a place that will easily accessible by your clients/ customers.

 

Flourish In Your Trade with the Use of Modern Construction Equipment- Get to Know the Various Advantages

Construction has always been a lucrative field to work in ever since the concept of civilization came into existence. And the progress of technology has added certain new dimensions what with the advent of heavy construction equipment on the block.

The Modern Construction Equipment- The Requirement

The use of heavy construction equipment is considered to be of utmost importance. Not only does it ensure that you finish off your construction project fast enough, but also makes sure that you are able to make quite a profit what with the reduced manpower and effort. Heavy construction equipment, such as, hydraulic cranes, excavators, cranes, tractors and other heavy equipment are quite important in the arena.

Using Modern Construction Equipment- Considering the Advantages

Modern construction equipment have a lot of advantages if one cares to consider. The one advantage of modern construction equipment that each and every one of us can witness is the profit it rakes in the long term. Investment in heavy equipment does cost a fortune for a construction company, but it does have advantages to make for it in the long run. Let us take a look at all those advantages.

  • Not only do heavy construction equipment successfully reduces manual labor to a considerable extent, it also saves a lot of time and gets the whole construction job done much faster and of course, efficiently.
  • Opting for modern makes of the construction equipment proves to be advantageous owing to the fact that they consume less fuel, are more eco friendly and if properly maintained have an appreciably long life.
  • The cranes, for instance, do the job of lifting up and carrying things from one place to another faster than what manual labor could do. And not to mention the amount of load it can carry at once.
  • Digging a stretch of earth manually uses up a lot of man power and not to mention the amount of time that it takes is quite devastating for the construction industry. However, the same work can be accomplished much more effectively with the use of excavators.
  • Modern construction equipments also come attached with a GPS tracking device, which means that you can now be absolutely worry free about your equipment from potential theft.
  • The modern day heavy construction equipment are also quite easy to handle and a moderately skilled operator can be well up to the job of handling it.
  • One may find that renting modern construction equipment is much more cost effective than investing in a brand new one. However, the fact remains that this cost efficiency is only short term. If you are thinking of long term profit, then it is best to consider brand new investment options.

So, if you are just setting foot in the arena of construction and are unaware of the various advantages that the use of modern heavy equipment hold for you, it is probably the best if you arm yourself with the information to ensure success in the field.

 

Used heavy equipment – good for the construction business

Due to the possibility of huge profits people are interested to start construction business. However, handling a construction company is not a simple job. You have to take care of it properly and keep all the required equipment in your site so that you can perform your work without any intervention.  You can find that several construction companies always focus on good and reliable equipment because without some of these useful machines you cannot work in this field. If you are a new comer who has just started this business then you must be aware about the future of your company, thereby, always try to keep a perfect balance that can help you to maintain your business within your budget.  Therefore, you have to find out some ways that make you able to continue your business without compromising your budget. Yes, it is true that such heavy equipment cost really high but if you can purchase little wisely then you will be definitely able to buy important equipment within your budget. You are quite aware with the fact that every stable construction company needs to keep ‘durable gears’ it is highly necessary to utilize such things during the time of operation. Because there are some jobs that cannot be handled by the workers so you have to put the necessary equipment that can take the loads and perform all the jobs. As you need to move heavy materials from one place to another therefore, if you can keep heavy equipments like excavator, bulldozer and others then you will be able to transfer all these things comfortably without putting your strength.

Now there are many such options or you can say places from where you can buy used equipment. You will get these machines within an affordable price. However you should keep open your eyes and try to find out such places or other ways that will help you to get the best used heavy equipment.

Instructions:

  • Try to check out internet in the early morning if you want to buy the best deals of used heavy equipment. Because a number of people place advertisement related to heavy equipment sale on Sundays so that you can get what you want at the Monday morning.
  • You should try to know the exact reserve prices of the machine that you want to buy from the seller.
  • Used machines are as powerful as the new one and they are very flexible as well. Therefore, if you are planning to buy it you should not hesitate because you will get high quality used equipment from various online stores.

For running a construction site it is highly necessary to purchase good and strong equipment. It doesn’t matter that whether you are working with a brand new model or a used one. If it can perform all the works and satisfy all your requirements then you definitely can rely on it.

How to maintain the Heavy Equipment Tires

Construction projects are becoming very popular due to its high demands. In the recent time, among many other business, construction sites have gained maximum attention from people. As they are willing to try their luck into it, it certainly gives them immense opportunities to make huge profit. One of the major elements of running your construction business successfully is the heavy equipment. Most of the construction companies depend on the heavy equipment to perform their job smoothly and effectively. You can also get several high quality products that help to reduce the damages of your site.

Well, one of the most important parts of any heavy equipment is the tires.  If you are willing to take care of your site and maintain all your heavy works properly with the equipment, then it is important to check its tires. During your work session, you need to complete all your work with the help of the tires. When you have to place the huge garbage in some other areas you have to use your heavy equipment. If the equipment doesn’t have perfect tires, it cannot take the weight of such huge garbage. Thereby, you need to take extra protection for the tires to manage your works. When the tires have to take huge items, the tires can be damaged it anyway. Thereby, the protection can help it to maintain its quality.

There are several ways to take care of your tires so that you don’t have to spend so much money to repair the tires frequently.

You should check your tires properly, on a regular basis: You should definitely buy inflated tires. It will help you to save money on fuel. Such tires come with great flexibility that helps the workers to work throughout the day. As the tires are the most important part of the equipment, it has to take huge loads. Therefore, you should go with the inflated tires. It always helps to carry loads. You should clean the tires on a regular basis.

You should buy tires from a local dealer: it is advisable to buy tires from a popular local dealer who is experienced in this field. You can ask your relatives or friends for someone who is involved with this field. In such cases, you should always rely on a reputed person. Thereby, it is really good to trust a local dealer. If you face any danger at some times or your tires need to be repaired soon then you will get to contact the dealer very soon.

To maintain your works properly, you need to buy the perfect heavy equipment that has perfect tires. Without the high standard tires, you cannot work properly in your construction sites. Thereby, to handle your job quite well, focus on the tires of the equipment and maintain it properly.

How fruitful will it be to buy brand new equipment rather than used one?

In every business people have to face some risks in order to meet success. Without sacrificing or taking risks in life you cannot achieve anything. The business world is very uncertain; nobody can predict what will happen in the next few days. Sometimes you will get success on the other hand you may have to face downfall as well. However, you have to always prepare for everything if you are involved with a business. It is same for the construction business also. When you are running a construction business then you have to deal with its every single detail very carefully. From choosing the right materials to heavy machineries and professional workers are very important for this business. The whole business is depending on the heavy equipment which is the crucial part of this business. Therefore, you have to give your full attention in order to buy heavy equipment. Some people like to buy used equipment because it comes within reasonable price. But it is always good to buy brand new equipment.

 

Advantages of brand new equipment in construction business

Usually, the contractors use heavy equipment in their sites in order to move heavy materials from one place to other. They also use this machine for heavy duty works in the construction sites. Therefore, many parts of the heavy equipment get damaged and can’t function well. The owners of that company try to sell that equipment at much less price. So, you should definitely not buy used equipment if you want to work smoothly at your site.  For buying such machine you can contact a reputed company and carefully verify whether the equipment can work perfectly or not. You also can check its different parts and its functions before buying it. If you have brand new equipment on your work site then you will be able to complete your work within time because you do not have to worry about your machine. Therefore, when you are going to buy excavator or bulldozer, look for the new equipment.

Try the renting option

However, it is also a fact that such equipment are highly expensive and if you cannot manage to afford the amount then you can try the renting option. There are many shops or companies that provide rental services. So you can definitely use this service. It is one of the best solutions that can save your money and at the same time will help you to finish your work timely. You just need to maintain this equipment properly. You have to repair the machine and take care of its every part. However, it is a difficult job but you have to perform it because after renting a machine it will be your responsibility.

If you want to continue your construction business and wish to get huge success in this field then you can buy the machines slowly. It is the best way to run a construction business.

Learn the Knack to Become an Efficient Heavy Construction Equipment Salesman

Sales are one of the most prosperous jobs in the market nowadays. If you have that spark to convince the customers to buy your product, then you can earn a lot of money. On the other hand, heavy construction equipment selling is gaining immense popularity with every passing day as the world is developing with new constructions and a demand for such equipment is always on the zenith. So becoming an efficient heavy construction equipment salesman is a match made in heaven. However, it is not an easy task and not everyone’s forte to become a salesman. It requires excellent skill and labor. If you want to step into this job, then you must be willing enough to learn the tricks and techniques to flourish in your job. The qualities that one must have to become a good heavy construction equipment salesman are:

  • Charming personality:

This is the key to success in the sales industry. If you do not wear that smile on your face and the willingness to listen to the requirements of your customer, then you will not be able to succeed in the job. Giving importance to the demands of the client and customers is very important when you want to sell your product.

  • Knowledge and aptitude:

Having a detailed knowledge of all your products is the second most important quality that a salesman of heavy construction equipment must have. When you sell the equipment to your customers, you must guide them through all the products offering then a suggestion about what might be best for them. Remember, the reputation of your company depends largely upon the satisfaction of the clients to go with your suggestion.

  • Do market research:

When you are the sales person of a heavy construction equipment manufacturing company, you must know the market trends beforehand. Which equipment are ample for rent and which a not sufficiently available, must be known to the salesman so that he can offer the customers a solution to this scarcity.

  • Solution to problems:

If the customer asks a question to the salesman, then it is very important for the salesman to provide solutions to the customer. A confident answer and coming up with a solution to every problems will make it quite easy for the salesman to sell off the heavy construction equipment.

  • Know the limits of the customer:

The client or customer might have a budget that he cannot exceed. Knowing the limits of the customer would give access to the salesman to offer all the variety that he has. Offering the best possible product to the client within budget is very important.

If you have all these qualities stated above and you think that you can go far ahead in this job, then this is the right time to start your career.

Construction of road involves many equipments

As we all know, the heavy construction equipment are the most important or rather vital component for the making of the modern civilisation. Without these equipments, none of the construction works would have been possible. Be it the construction of a building, or a road, or even a railway line, without the heavy duty construction equipments, the works would not have been done, at least not so swiftly and not without heavy labour. Especially in case of the construction of the roads, these heavy construction equipment help a lot to make such strong, smooth and long roads, that make it possible for us to stay connected to the rest of the world.

The construction equipments required for the construction of roads:

For the preliminary stage, the construction equipments that are needed for the construction of roads are primarily the excavators. It scoops out the sand, earth, and gravel from the ground to make the base for the road. The asphalt spreader make the temperature reach a level so that the asphalt can be regulated to be spread on the roadbed. Then the concrete paving machine spreads and levels the concrete on the roadbed. Some the construction equipments that are used for the construction of the roads are:

  • Air track drill: This machine or construction equipment that has an air operated motor is very suitable for opencast blasting.
  • Chip spreader: This machine spreads the bitumen on the roads and rolls them by a compactor.
  • Cold planers: This road construction equipment removes the concrete, asphalt and bituminous pavement so that the road can be opened to the traffic. This machine is also known as the pavement planer.
  • Compactors: This is a vital construction equipment for the construction of the roads, as this machine compresses the road, the asphalt, the gravels, the soil and the concrete after the road’s base has been made. This is very important for ensuring that the surface of the road is smooth. Rollers, padfoot, steel drums, pull type sheepsfoot etc. Are types of compactors.
  • Curb machine: This machine is used for the continuous creation of the curb and gutter.
  • Crushing machine: This is a very interesting machine that helps in the construction of roads by crushing large rocks into small rocks or rock dust or gravel. It is used for crushing non-abrasive and soft material like gypsum, seeds, coal, limestone or any other soft material. It is of 2 types – a jaw crusher and a cone crusher.
  • Oil distributor: This road construction machine sprays tack coat or a prime coat by its heating system and unique spray bar system.
  • Paver: This machine spreads the asphalt on the road bed, and normally this hot asphalt is brought to the paver through another dump truck.
  • A water truck is also used for the dust control.
  • A sand truck is used for distributing or spreading sand on the icy roads in the winter so that the vehicles do not skit on the roads.

A Basic Degree Of Skill Is Sufficient To Operate An Excavator

In early years when the excavator was newly introduced in the construction arena, it was considered as a toy and can be used very easily to get the required work done. However, now the situation has changed completely and with the kind of changes the construction industry has seen during the last few decades, it has compelled the heavy equipment manufacturing companies to modify the machine and bring in technological advancements to meet the requirements of the end user. Therefore, what was once considered a toy perhaps no longer fall in that category. Having said that, it no where imply that learning to operate an excavator is a tough business. It is rather considered a simple task and operators master the art of playing with the system in no time.

We would be discussing how one can operate an excavator and what are the things that he needs to keep in mind before he starts off with the machine.

Nature of work:-  The excavator is meant to dig deep in the earth but not all excavators have the potential to go that deep. That is why, excavators manufacturing company manufactures different models that are used for different purposes. They also vary in weights. Hence, it is important to know the kind of project you are in and then you can determine the type of excavator you would need for the project. Ideally, the rule is you can use a compact excavator to dig on a small plot. However, if you are working on a big project where you are given a big piece of land to excavate, the huge excavators are the one you’d be looking for.

Know your machine well:-  Many a times we take the longer route to do a particular work which could have been done at a lesser duration. This happens due to lack of knowledge of the machine you are working on. An operator is supposed to know almost everything about the excavator (barring few technical things which are known by the mechanic). It helps to perform the work at a much faster pace and with great accuracy. Also, if you tend to know a bit of technical stuff, it comes handy in many ways. For instance, you see the excavator is not working at its full swing. You assume the problem is with a particular part of the machine which after doing a thorough check is found to be faulty. You immediately get that fixed and therefore save a good deal of time of your company by recognizing the problem in the first stance. This was only possible by someone who knew a lot about the machine.

Work under an expert:-  Working under an expert fills you with a lot of positivity and helps you learn more from his experiences. You may not commit the mistake which was once done by your trainer/senior. If you have the urge to learn, they will be the best teacher for you.