Category Archives: 6-way blade

Simple 3 Tips To Maintain A Dozer

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Prevention is always better than cure. Steady and éclat maintenance are key factors to keep the dozers in optimum condition irrespective of the age of the equipment, geographical and weather conditions. Age is the most important thing which acts upon the performance of a dozer. . If you have purchased a used dozer, you have to take extra care. As a used dozer has undergone wear and tear for many years, its level of performance automatically stoops down.

You may have faced problems with the performance of your used dozer many times and at the same time, you cannot stop using this equipment as it plays a major role in a construction site. So, why not maintain spend some time in maintaining your dozer properly? After you read this short article, you will realise how easy it is to keep up your dozer’s proficiency.

Tips to maintain a dozer properly

  • Checkups for steady repair: – Regular checkups of the dozer are essential to ensure a fine working condition. You should change the oil and other fluids in a systematic interval. If you keep your dozer in extremely wet climatic condition, it will damage more quickly. It is because rust will form rapidly on the important parts of the machine. In case of used dozers, the chains, bolts and the undercarriage should be checked to detect the damaged parts.

 

Checking helps to increase the life span of the constructional equipment. If you find any defaced part, immediately repair it with the assistance of a skilled technician. To avoid any kind of damage, don’t forget to use appropriate tools while checking. You should also put on Hard Hat and gloves while going through the machine.

  • Cleaning of the track frame: – To work in muddy conditions especially in winter freezes the mud on the track frame of the dozer. Therefore, you cannot ignore cleaning off the mud while the equipment is still warm. Use a track spade which perfectly fits into the gap between the track and the frame making the work of cleaning smoother for you. After cleaning, park the dozer either in the snow or on aged tires.

 

If you do not shovel the mud, it will freeze on the track creating a big problem for the dozer to start up and move. The finest way to unfreeze a frozen dozer is to control the heat and fire and to make use of propane light.

  • Maintenance of Electrical system: – Proper maintenance ofelectrical system which consists of batteries and wires should not be overlooked. Their periodical checkup is necessary to avoid short circuit. Replace the damage or old battery instantly once you detect them. Your wire should be good enough with an efficient fuse system.

 

Use 12 V batteries connected in series to ensure the working of your 12V radio for two-way business. You can also make use of an inline fuse system close to your battery. It will help the radio to work more effectively without causing any harm to the other parts of the machine.

To put it practically, routine maintenance of equipment will help you to save your money. So, it’s better to do minor fixing to upturn the average life of the dozer.

Related articles across the web

SU Blades vs. 6-way blades on a Dozer

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Bulldozer or dozer is specifically a crawler or continuous tracked tractor which is essentially used for pushing a huge quantity of either soil, rubble or sand or any other heavy or bulky material from the construction site. The machine has multipurpose utility and can be used at various sites as for military bases, mines or in heavy industry or in farms or at quarries. The multifaceted dozer has rear ripper in the shape of claw that can rip through materials and thus makes it easy for carrying or shifting from one place to another.

What are SU Blades?

Basically, dozer blades on the front are of different types and according to their shape and purpose, they have been classified.

  1. S-Blade—This is the straight blade that is short without any lateral curve. These do not have any side wings and are essentially used for fine grading.
  2. U-Blade—This is the universal blade with curved and tall design. Unlike S-blade, it has large side wings which are used for carrying heavy or loads of materials.
  3. S-U Blade—As the name suggests it is an amalgamation of the two but is shorter and does not have as fine curve as U-Blade. Comparatively, the side wings are also shorter.

.

What are the 6-way blades?

The 6-way blades are a bigger track dozer and are used for lifting and doing much bulkier work. Ways signify that blades can be moved in various directions like it can go left, right, upward, downward, tilt and curve. The ways define the movement of the blade. For intricate and finer work, one can choose to dozer with better efficiency. 6 ways basically defines the size of the dozer and the capacity. If someone has loads of work to do, then one can opt for bigger frame and much efficient machine. It is the cylinder and the horse power which actually measures the efficiency and weight of the machine.

SU Blades vs. 6-way blades on a Dozer

The 6 way blades can either have S type or U type or S-U type blades. The blades make dozer sharper and give it a better edge to crawl through the terrain and clear the way whereas 6 way blades increase the functioning capability of a dozer. The increased number of blades gives better mobility.

This is the main difference between the two. Various companies make dozer which is either light or heavy and depending on the work, one can make a smart choice. To know more about a dozer, it is best to make a comparative analysis of the different model that can give a vivid idea on the bulldozer and be cost efficient.

 

 

Operating A Dozer Is As Simple As Driving Your Own Car

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

If you think that in order to operate a dozer, you need to take some very special training then you probably have to change your thoughts. It may require you to take some level of training but it is definitely not as rigid or complex as taking a space shuttle and flying away in the space. It may sound to be little complicated but the process is quite simple and easy to understand. At the end, you may find it as simple as driving your car. Few things that are important is to understand the intricacies of the equipment and once you know the in and outs of operating the dozer, it would be nothing more than a cake walk for you.
Things that one should consider learning in order to operate a dozer
Knowing more about the machine:- If you want to be a good operator, it is of due importance to know well about the machine. You should know the utilities of various switches inside the cabin. They may be for various reasons and as long as you do not know them all, you may not be able to make optimum utilization of those switches. It may also extend the period of a work assigned to you which will ultimately affect your productivity and may also incur loss to the company. Other than this, not knowing the various functions of the dozer may also lead to accidents and unwanted casualties. No company would ever want these things to happen and therefore, one should learn everything possible about the dozer they are working on.
Get some basic training:- Due to technological changes happening every other day, new model are coming up in the market. These models more or less have the same functions. However, the manufacturing companies try to add few more features to make it look more user-friendly and therefore also attach a higher price value to it. It is because of this reason that the operator should get some basic training in understanding those extra functions and that he can incorporate them in his day to day activities.
Buddy-up under an expert:- You learn well if you learn it from an expert. Operators who have been in this industry for years may have worked with all sorts of machines and therefore are quite competent enough to train young guns. They may teach you many things as to how you can operate a dozer and may also share few of their experiences which may help you under a given situation. The knowledge they have gained all over the years will help the trainees fetch more benefit than any other book can ever provide.
Check the web:- You can also take help from internet to know how you can operate the machine. You can go to youtube and check live demonstration. This will give you a better picture of how you can operate the same stuff all by yourself. Though this is useful, you still will get to learn more from physically working on the dozer.