Category Archives: Jobsite

Jobsite safety for cell phone usage

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Cell phones have now become an integral part of your lives and there is probably not a single day when you do not make use of your cell phones. Right from staying connected to finding ways on google, it is being used for every small purpose that we can think of. You can get the latest updates of your favorite sport or know about anything going on any part of the world all that is available on your cell phone. Life has become so comfortable with the utility of cell phones but there also lies a danger attached to it. There have been a numbers of accidents and deaths reported of people who were using cell phones and could not detect a possible threat coming towards them. They were so engrossed on their cell phones that they did not realize the threat approaching them and met with an accident that resulted to serious injuries and also caused death to many.

When accidents can become so rampant while you are on the road then imagine how manifolds the danger might increase when the same activity is performed on a construction jobsite. A construction jobsite is a place where accidents happen even when people are aware of their surroundings. Even after keeping their eyes and ears widely open, accidents still occur. Most of the accidents are avoidable and there are very few which are not. Now the main reasons why large number of accidents take place in a jobsite is people not aware of their surroundings and are deeply focused on something that they should not be. The most common is using cell phones.

It has been witnessed that people especially on the construction jobsites uses their cell phones during working hours. Now, some have to use it to communicate with people linked with the job. It may be perhaps part of his job but definitely not at the cost of risking his life. People tend to get lost while talking and are so occupied in the conversation that they forget about what is happening around them and if they are at all standing in front of or beside any substance that can turn into a potential risk to them.

Texting is another dangerous thing that people do on the jobsite. While you are texting something, your entire attention is on the cell phone and you tend to get completely disconnected with the outside world. You try to send some important message but you forget something that is more important than the message and it is your life. While you are talking you someone over the phone you still can see things around and in case if something approaches you, you can swiftly move away but while texting, you have no idea what is going on around you. You can just hear things but can’t see anything other than the stuff you are writing.

The best way out is to create a safe zone for people where they can enter and call people up. Make it a mandate that they can’t use their cell phones anywhere other than those zones. In this way, they can do safe texting.

Tips of cleaning a job site with the help of Skid Steer

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Choose a skid steer from a reputed rental company and read the safety tips in the operator’s guidebook to get information on how it is operated. It is a heavy machine which can turn at a swiftly, tips over effortlessly and changes direction suddenly. Here the tips to get started with the skid steer

Learn to control the machine-Skid steer loaders are controlled by two steering handles, each one situated on each side arm where the machine rests. These steering handles contain the control buttons for accessories, situated on the tops like triggers on the machine’s forward part. Usually there is a figure which gives details about the console beside each attachment.

Bring the machine on the job site- In order to get rid of the dirt, debris and other inert materials fetch it on the job site.

Find out the location of the controls which starts the machine-The start or ignition is normally functioned by a key having similarities with that of a car. There are some skid steers that have a button for starting up, and the latest and innovative machines have a key pad for punching in a code and start the engine.

Look for the throttle handle-A throttle handle is a flat bar made up of metal. It has a rubber grip on top of the console extending to the right side of the right arm resting with a hole for sliding in forward and backward direction.

Undo the control switches and buttons-Many skid steer s have a lock system attached in the machine. It also consists of the control switches near the mechanism panel which enables lock symbols situated under them, and a lot of time it is found it has a red lamp operating as soon as the switch is put off, however the lamp turns to green color when the switch is put on. You will have to control the power switch to put on to start the machine to operate. This could be done by fastening the seat belt or turn over a switch.

Shift the bucket or front part up off the land- It means dragging one of the control levers, in, toward the middle of the device, for example, you will bend the stick in the left hand side towards the right hand side, and this is generally the stick that lifts up and lowers the machine bucket. Owing to these joysticks which perform numerous functions, be cautious not to move about the joysticks obliquely; instead try to move it straight in the right direction or the left.

Lift up the attachment far above the ground to find a clear sight of what is in front of you, bring it down; lift it again, to experience its movement- If the machine’s left stick lifts up the bucket, then the stick at the right will alter its position. By bending the lever at the right to the left, you will lift the front side of the machine’s bucket in a scooping movement, and by moving to the right hand side with the help of the right stick, you will unload it. Lift and bring down the bucket, scoop and dump it, and you will feel the movement.

Drive slowly in front putting on the control sticks. The engine will go forward, and if the throttle is not operating, and you progress both sticks slowly and at the same pace, you will be able to move it effortlessly without delay. While you drag back on the control levers, you will back up, and have less view about what is happening behind.

Move about the joysticks separately Pushing merely the right stick will turn the machine to the direction in the left. Driving on the left side lever will manoeuvre the machine right.

Related articles across the web

Compact loader is the best heavy equipment for utility jobsite

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

If you want to buy heavy equipment for your jobsite, don’t get worried because you will get a wide range of heavy equipment on the market. If you want skid steers, track loaders or backhoes you just have to take a name and the market is always ready to provide you that machine and fulfil all your requirements. But before buying anything one has to know that which one of the heavy equipment is suitable for his jobsite.

People always try to select or choose proper heavy equipment for their jobsite. As it will help them to complete their work properly so they become very selective in such cases.  They just want the best thing for their jobsite as they are investing lot of money for it. They are ready to purchase expensive machines so they always decide their priorities and compare things before purchasing heavy equipment.
Among the many other heavy equipment compact loaders are one of the most useful machineries available in the market. This equipment has many facilities and can perform several types of works in your jobsite so you can blindly rely on it.   People just love to use it in their jobsite only because of its good performance. If you have this equipment which is actually versatile then you will not face any damage on your jobsite.

Compact loader also has perfect size and it actually fits in any kind of jobsite. So the contractors always choose this heavy machine for their utility jobsite.  It is able to carry the load of many heavy things like gravel, raw material, dirt, asphalt and many more things and it also can go to the smallest area because of its small size.

This machine has many attachments also and all these attachments can be replaced as well. So if you want to replace it with any other things like augers, hammers, mowers or other things you are allowed to do so. In history the compact track loaders can perform very little tasks but now with the passing of time the machine is able to perform many important works. So now with compact loader you can perform any task you want to do.

It is true that you are planning to perform your important work in your jobsite through this heavy equipment so you always have to be careful about the safety and protection of this machine. In case of compact track loader you will be free from such worries or tension because the compact track loaders do not bring harm or any kind of damage to your utility jobsite.  All the parts of this machine and also of its attachments are very strong and also able to carry heavy workload. It will not break down if the workload is extremely high.

 

Hydraulic excavator is the name of the other such equipment which can perform any task in the utility jobsite. Through this hydraulic excavator you will be able to tackle the sensitive digging jobs easily.

Related articles across the web

What Are The Various Safety Protocol One Should Follow Inside A Construction Site

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Safety is perhaps one of the most important things that one would not like to compromise on and especially when you are associated with an industry that has high risk involved in it. Construction and mining industries are one such industries where the chances of an accident happening is much higher than compared to any other industry and which is why employees are required to follow the safety measures more stringently. They just can’t compromise on safety parameters and have to make sure that they wear all the accessories that will keep them safe and sound on the field. As a matter of fact, accidents are merely the outcome or carelessness and utter negligence and if that can be curtailed, many accidents can be avoided. It is better to be safe than sorry, this should be the only mantra for workers working in this kind of positions.

Here we would be discussing about the various safety protocols that one could implement in his company to avoid unwanted incidences.

Wearing of safety accessories:-  There are many construction companies which do not pay much heed to wearing of safety accessories and allow their workers to take unwanted risks. The workers on the other hand may not know the importance of these accessories and take the risk not knowing that if anything goes wrong, there is every possibility of them getting killed. It is therefore should be mandatory for every construction company to ask their employees to wear the required safety accessory in order to get the work done. Remember that losing an employee would cost you more than keeping a constant check and ensuring that they are on with their stuffs. Moreover, it will also keep you away from any legal hassle.

Give them the right sort of training:-  A good number of your employees many not even know how to apply first aid to a person who has just had an accident. They would rather wait for the ambulance to come in and pick the person away. That makes the job of the doctor pretty hard and leaves a strong possibility of the person getting killed. In order to avoid this, it makes more sense to train your employees on how to give first aid and also show them some demonstrations. It would be a good option to let them try few of the things they have learnt. Things you learn inside the training room may turn out to be very different when you actually need to do it in practical.

Ensure the supervisor do their job well:-  You should keep able and competent people as supervisors who understands the importance of employees safety and also makes sure that the employees follow the safety guidelines given to them.

Accidents are inevitable but can be largely contained:-  Accidents don’t call up and come and therefore one can’t make sure that they are 100% accident protected. However, by following the safety guidelines, one can definitely bring down the number of accidents and keep the employees in a minimal risk environment.

Compromising On Safety Standards Can Risk The Life Of Your Employees

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

A construction site is never meant for children. The reason is that these sites are full of dangers. Dangers that we can’t foresee and they can come upon at any time from any corner of the site if things are left in a haphazard manner. Though all construction sites are meant to follow some safety parameters, accidents happen when they fail to follow those parameters and take an unwanted risk, which leads to untoward incidents. Well, it is very critical to first understand the value of a human life and once that is realized things will start falling in place. Other than that, workers should also understand the importance of safety measures in a work environment like this. The workers during many instances have to work very high above the ground and it is during such instances, if they do not take proper safety precautions, things may turn dangerous for them.

So how can one incur the practice of following the safety measures at all times in the construction premises? Firstly, the employees should be given proper training and must be made aware of the importance of the training. The employees should take the training very seriously and that can happen only when they understand how crucial the training is to them. Show them videos where employees in a construction site are wearing all the required accessories that will help them to remain safe. Also train them on first aid facilities and what they should do prima facie when an accident occurs. Overall, you would be gearing them up with all the required information that will help them to save someone’s life.

Working under an experienced person will prove to be very beneficial to the newbie. They may not have the experience to deal with situations. Given required training will let them know what to do but if they have someone experienced by their side, it always make things easier. More to this, the experienced guy may also share his experiences with them which will be a good learning to them.

New safety devices are the need of the hour. You can’t hold on to the same old stuff which was being used a decade ago. There are new things coming up in the market which can give better protection to your employees from any eventuality and incorporating those things will definitely not harm the finances your business in any manner.

Implementing stringent rules are a must in this form of an industry. Be it construction or mining industry, safety of the employees come first. Therefore, it becomes the onus of the company to ensure that all the employees are rigorously following the safety guidelines while they are at work. If required, you can ask their supervisors to check if all the workers have worn their safety stuffs before starting their work.

It’s better to be safe rather than being sorry about things that were well in your control. Compromising on safety measures can cost you big time.