Category Archives: Machinery

How to buy a used excavator?

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

In mining fields, or in construction sites, excavators are always very much in demand. For removing the ruins and wastes from the work site, or to load the construction materials to the site, excavators are the only vehicles that can help. However, buying a brand new excavators can burn a whole into the pocket, moreover, there is no specific necessity of a new one, as it serves no other purpose than what a second hand or used excavator does. Therefore, buying a suitable and good conditioned excavator is quite an intelligent task to do. This however needs a detailed survey of the used excavator, before buying it.

  • Inspect the physical condition of the excavator:

The first thing that the buyer should do is to carefully inspect the physical condition of the used excavator.  This includes everything from whether each and every part of the excavator like, the boom, the stick, the bucket, the cab etc. are in proper working condition or not. It should also be checked whether the engine starts smoothly or not. One of the most important factors that must be made sure is that there is no oil leakage from the engine of the excavator as it would mean that the excavator was not serviced properly or was not taken care of. If there is any visible damage on the used excavator, then it is very obvious that, that particular excavator should be removed from your wish list.

  • Make sure that the undercarriage is in proper condition:

Most of the buyers fail to inspect the undercarriage of the used excavators. However, it is very important to inspect that. It is very obvious that due to the usage of the excavator, the undercarriage would be a little scratched or a few other damages would be there. But it should be made sure that the undercarriage is in a repairable condition and it does not cost too much.

  • Check the papers:

The papers of the heavy mechanical vehicle are the most important thing. Without papers, the vehicle will have no further servicing. From the papers of the vehicle, it can also be inferred that when the vehicle was manufactured or how old it is. Thus you can take your decision, whether to invest on this used excavator or not.

  • Fuel consumption:

Before taking your final decision, start the engine of the excavator that you wish to buy and check its fuel consumption rate. If it is not satisfactory, then do not buy the excavator and look out for other options.

When you start a construction business or any other heavy business, it is very important that you are equipped with all the machines and equipment. This however burns a large hole in the pocket. Therefore, going to buy branded new machines or other equipment, then the cost automatically goes higher. A good conditioned, second hand equipment, especially a used excavator, comes at a much cheaper cost, but provide you with all the services that you require.

Operating A Dozer Is As Simple As Driving Your Own Car

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

If you think that in order to operate a dozer, you need to take some very special training then you probably have to change your thoughts. It may require you to take some level of training but it is definitely not as rigid or complex as taking a space shuttle and flying away in the space. It may sound to be little complicated but the process is quite simple and easy to understand. At the end, you may find it as simple as driving your car. Few things that are important is to understand the intricacies of the equipment and once you know the in and outs of operating the dozer, it would be nothing more than a cake walk for you.
Things that one should consider learning in order to operate a dozer
Knowing more about the machine:- If you want to be a good operator, it is of due importance to know well about the machine. You should know the utilities of various switches inside the cabin. They may be for various reasons and as long as you do not know them all, you may not be able to make optimum utilization of those switches. It may also extend the period of a work assigned to you which will ultimately affect your productivity and may also incur loss to the company. Other than this, not knowing the various functions of the dozer may also lead to accidents and unwanted casualties. No company would ever want these things to happen and therefore, one should learn everything possible about the dozer they are working on.
Get some basic training:- Due to technological changes happening every other day, new model are coming up in the market. These models more or less have the same functions. However, the manufacturing companies try to add few more features to make it look more user-friendly and therefore also attach a higher price value to it. It is because of this reason that the operator should get some basic training in understanding those extra functions and that he can incorporate them in his day to day activities.
Buddy-up under an expert:- You learn well if you learn it from an expert. Operators who have been in this industry for years may have worked with all sorts of machines and therefore are quite competent enough to train young guns. They may teach you many things as to how you can operate a dozer and may also share few of their experiences which may help you under a given situation. The knowledge they have gained all over the years will help the trainees fetch more benefit than any other book can ever provide.
Check the web:- You can also take help from internet to know how you can operate the machine. You can go to youtube and check live demonstration. This will give you a better picture of how you can operate the same stuff all by yourself. Though this is useful, you still will get to learn more from physically working on the dozer.

Reduce Expenses and Earn Profit- Rent Wheel Loaders for Construction

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

The smooth operation of heavy equipment largely depends on the use of heavy equipment. If you are into the field of the construction, you definitely cannot ignore the importance of these equipment for the fulfilment of the construction job. Among the many types of heavy equipment that are required on the site, the wheel loader perhaps forms an indispensable part.
What Is A Wheel Loader?
Putting it simply, a wheel loader is just another of the heavy construction equipment that is used in the construction industry for the purpose of moving heavy materials such as asphalt, dirt, snow, debris, feed, gravel and the like. As the name suggests, the wheel loader is used in the construction arena in order to load and move things from place to another without pushing it. They usually come attached with a bucket at the front.
Renting Wheel Loaders
Wheel loaders, no doubt form an important part of any construction business, but it is also a stated fact that these equipment are expensive. For small enterprises who are struggling to gain a foothold in the industry, investing such large sums of money on wheel loaders is not a very viable option. In such a scenario, renting wheel loaders seems to be the most effective alternative as not only does it serve your purpose, but also cuts cost quite effectively. And when you have to invest less, then it is obvious that your profit margin is sure to expand considerably. Moreover, when you have to deal with projects that are for comparatively shorter periods of time, renting a wheel loader instead of buying it seems like a more prudent alternative.
Check Before You Seal the Deal
There are lot of rental organizations on the block from where you can rent wheel loader. However, you need to keep certain things in mind before you seal the deal.
• First and foremost, make sure that the rental company picked by you is reliable and has a good name in the market. This ensures that the heavy equipment that you are renting is of the best quality. And we all understand the importance of quality when it comes to heavy equipment.
• Make sure that the wheel loader that you are renting is good enough to serve your purpose. Make sure that the controls are in perfect order and can be easily operated as is usually with wheel loaders. Also ensure that the engine of the wheel loader is on perfect order as it is of paramount importance to the smooth functioning of the loader.
• Before fixing on a particular rental agency, be sure to check out other alternatives available on the block. This will ensure that you find the best wheel loader available for rent. Additionally, looking for second opinion ensures that you do not miss out any lucrative offers.
It is, therefore very clear that wheel loaders have acquired quite an important place as far as the construction arena is concerned and renting the equipment instead of buying it certainly contributes to the effective cutting down of expenses.

 

 

How Far Is it Important To Keep Your Heavy Equipment Well Maintained

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

You buy a new house and you do everything to ensure that it looks new all the time. You bring in new furniture, fit in with the most expensive false-ceiling that you can afford and also with all these expenses, you also make sure that you paint the house at least once a year and call people to pest free your house. You do this because you want your house to not lose its shine till the time you own it. This will help you in two ways. Firstly, it will be a hygienic place to live and second if you ever wish to sell it off, you can fetch a good price for it. It is very obvious that the buyer will not like to spend a good deal of money after buying your house by paying a fortune. Moreover, your house being in good condition makes it saleable at a high price as compared to other properties in the same location. Well, the same theory goes with heavy equipment.

Heavy equipment may not be as expensive as the property you live in but at the same time, it definitely pinches to buy a new machine to meet your business requirements. Undoubtedly, the high cost of heavy equipment makes it unbearable for a small time construction company to purchase a new stuff which is why they are more likely to end up buying a second hand or a used machine to take care of their project needs.

How frequently should one service his machine?

The frequency for servicing the machine largely depends upon the type of work it was under. Nevertheless, the thumb rule is that one should service the machine once in a month or at times once in 2 months. You may simply call in a mechanic at your place and ask them to check the different parts of the equipment. Change the oil, lubricate the different parts of the machine, give it a complete wash and if there happens to be any spots that got burned, fix it up as soon as possible without waiting for the servicing period to knock your door.

Paint your machine:-  Not much heed is paid to painting the equipment as we all find that job to be of least importance. Well, as far as taking care of heavy equipment are concerned, there is nothing known as least important in its vocabulary. If you find your stuff worn out, try to get that repaired by either painting that part of the equipment or out some sticker which will limit any further damage to the part. If we keep it idle, dust will settle in and as a result it starts damaging the part at a much faster pace than it would have. Moreover, it will also give a feel good factor to us at any moment our eyes fall on the machine.

Keeping good mechanics as part of the crew is an added advantage as they can fix any problem that comes up during the project and ensure that things run at the same pace without falling apart.

Is Heavy Equipment going Green, that is, Environment Friendly?

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

When we talk about heavy equipment, what is the first thing that comes to our mind? The gigantic appearance and huge structure that releases thick and black fumes that fills the air, isn’t it? If you drive your car behind a heavy construction vehicle, then you will not be able to breathe in the horrible amount of smoke that the vehicle emits. But now times have changed and the vehicles emit such a lesser amount of smoke that it is quite possible to call them “environment friendly” equipment. Why do we need to focus on environment friendly heavy construction equipment? With every passing day, as our environment is becoming threatened by the amount of pollution that is generated by the vehicles, including heavy construction equipment, people are becoming more conscious about making the environment pollution free. Therefore the heavy construction equipment manufacturing companies are also now focusing on making equipment that emits far lesser amount of smoke. What are the changes that have been introduced to the heavy construction equipment in order to make them environment friendly?

  • One of the biggest reasons of the pollution that is emitted by the heavy construction equipment is that the heavy construction vehicles have a very low horsepower because of the old-dated engines, and therefore, they emit tremendous smoke. As in modern technology, that has become greener or more conscious about making the environment pollution free, they now make the vehicles equipped with electronic engines. And electronic engines lead to a very high horsepower. High horsepower is very beneficial for lesser amount of smoke emission.
  • The next thing that makes the heavy equipment environment friendly is the use of automatic transmission. As the equipment become fully automated, the fuel consumption is much lesser, and the lesser the fuel consumption is, the less will be the smoke emission and the causing of pollution can be controlled.
  • The other change that many other heavy equipment manufacturing companies are focusing on is the production of nickel free and chromium free equipment that are more environment friendly than earlier. Not only does this make the equipment more durable, but also makes its component life extended and as the gear speeds will reduce, there will quite less breakdowns. And if there are less breakdowns, then obviously, there will be less requirement for any replacement of the parts of the heavy construction equipment.

All these measurements will make the vehicles quite environment friendly. Even if you recycle the old or second hand equipment rather than discarding them into the environment, the environment will be less harmed and of course the equipment will become of use, and the cost will be reduced. Environment friendly heavy construction equipment are not only beneficial for the eco-system, but also for the construction company that is using the equipment as it will reduce the cost of maintenance of the equipment. So, go green and buy environment friendly heavy construction equipment for your company.

Try Caterpillar 330 excavators at your work place and get all the solution of your problem

Caterpillar 330 is a type of excavator that comes with great attributes. As the equipment can serve you a variety of works you can definitely consider this item anytime you require it. Excavators help to dig up materials or soil. This equipment is very strong and also possesses the right potential to carry a great loads and a lot of materials within a short time. The size of the excavator is very small and one can easily move it from one place to other place. There are several types of excavators that have great facilities. Among them caterpillar 330 excavator is the best one and also very common. There are some models that have the same specification like 330 excavators. In order to know the details of this excavator you have to know about its different parts and the best qualities of this machine.

Engine:

It is true that the most important part of an excavator is its engine that can give you the maximum power. Without a perfect engine a caterpillar 330 excavator cannot perform a single work. After examining its different parts it has been proved that the engine of caterpillar 330 is just like the 330BL excavator. It applies 222 horsepower. More over the point is that the engine is the most important part of an excavator that actually helps to do its work smoothly. Therefore if you are planning to buy an excavator then you definitely should check out whether its engine is good or not.

 

Bucket:

You know that heavy equipment can take huge loads and perform good works. In order to perform different types of works it is highly necessary to have good and proper specification. Bucket is another important part of the excavator. However, different types of excavators have different buckets. The size of the bucket is different from each other.

Other specifications:

There are several other specifications that actually important for running an excavator. It actually differs from machine to machine. Therefore, you have to make it clear that whether the excavator has perfect specifications or not before purchasing it.

 

You also want to know the fact that how you run an excavator. Don’t worry the process is very easy.

You have to start the important part of the equipment that is engine. Almost like the vehicles you have to start its engine. Therefore you have to turn a key to turn it on.

In order to run the excavator you have to be concerned over it. It has certain process that you have to follow. Without following such steps you will not be able to perform your works. Therefore, at first, try to get all the details about the equipment and then you can try this equipment at your work place.

Check out the list of some heavy equipment which are used at quarry

May be from many years ago the practice of quarrying rocks and mineral has been used for creating human infrastructure. Common core mining is basically a Canadian apprenticeship program for pit workers and quarry. Several heavy works has been done in quarry so the demands of some heavy equipment are very high in order to perform such works properly.   Everyone loves to use marble in their house as it is one of the most favorite rocks that people used in formal settings. People like its beautiful and distinct look. It is very useful and can easily use in different types of projects. At first marble was used by the Greeks and Romans in their sculptures. Only because of its soft nature people use marble from such a long time. One has to know the process of mining marble from quarries and it also requires some heavy equipment which helps people to perform this work.
After the discovery of the marble you have to take it out with the help of some heavy equipment. Then people make quarries which are very different than the other mines as it opens to air. Then through some process like sawing, drilling or removing big chunks of marble from the earth one has to extract marble and all such processes are performed by heavy equipment.

Through the help of some heavy equipment the quality of marble has been examined then the impurities and also the cracks are eliminated from the marble. In order to transport marble from one place to another people depend on heavy equipment. 

Like marble every other works which are performed at quarry need the help of heavy equipment. Here is a list of some heavy equipment which is used at quarry.

 

Vibrating feeder: 

A vibrating feeder is kind of heavy equipment which helps to perform various works. Vibrating feeders are hugely used in many quarry operations and mining and it also has many features. Some of its brilliant features are dependable operation, smooth vibrating and great service. The most important thing is that the vibrating speeders are very useful for feeding. It contains vibrator, motor vibrating device, vibrating frame, spring and motor. The motor helps it to rotate and the feeder gains massive forces and power which is actually needed for vibration.  Because when the feeder vibrates the materials go through the funnel ‘and are screened.’

Permanent and self-cleaning magnets:
Permanent and self-cleaning magnets are very useful. Generally a permanent magnet is created from a material which is already magnetized and also able to create its own constant magnetic ground. Permanent magnetic separators are applied on the conveyor belts. The self- cleaning magnets help to remove or separate non-metallic or metallic materials.

Forklifts:

A forklift is really a piece of necessary equipment for different kinds of quarry or mining operation. There are different kinds of forklifts. Industrial forklifts help to move mining material and supplies. Rough forklifts can tackle any rugged situations and perform really well.

Shield Your Heavy Equipment From The Deadly Winter

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Winter is welcomed in many parts of our country but in some parts, it is indeed a pain as one has to go through a good deal of trouble to protect themselves from the ferocious weather. It is just not for us that this season comes with pain but also for the construction segment as a whole. Imagine in cities where it snows for most of the time in the year, winters are just deadly. Folks from the construction domain are more worried about their heavy equipment as this season not only dampens their business but also the working capability of their machines. It just takes away the power from the equipment leading to enough complication once the weather changes. This leaves them with a damp business and few rotten machines. Though, the equipment can be fixed, it takes time to get them back on their toes.

What should one do to winterize their equipment?

The owner of the construction equipment needs to follow some very basic principles. The first would be to lubricate the machine before the start of the season. It would be practically impossible to do the lubrication thing once it starts snowing. No one can dare to deal with the machines in such a rough weather. Therefore, it would be prudent to do away with the oiling and maintenance stuff at the very beginning and before you start feeling the cold breeze swaying your cheeks.

Winterizing your equipment begins with checking each point of your machine that you feel should be lubricated. It would be wise if you prepare checkpoints before you begin working with it. The checkpoints will help you identify the various points in the machines that you need to work on. As you keep completing the work, keep ticking the checkpoints. This will ensure that you leave nothing behind and have taken care of everything mentioned on the list.

Get a good mechanic to get this job done

One of the most important steps towards shielding your construction equipment from winter is to get the overall machine checked by a good mechanic. It may not cost you much to hire an experienced mechanic who knows the in and out of the equipment and knows what needs to be done to protect them from winter. If he finds any part of the machine to be faulty, that should be replaced immediately. There are instances where the equipment owner gave the job of winterizing the equipment to the operator and they with their limited knowledge tried doing everything possible to prevent the machine but eventually, it took its toll. The machine weren’t working with the beginning of the next season and the owners were left puzzled. Had they given the work to an expertise, things would have been favourable to them.

Once you are done with the repair job, the next thing is to store the equipment in a cool and dry environment. It should not be exposed to outside climate or else it might develop complications.

Following these steps will ensure a safe winter for your heavy equipment.

 

Insure Your Heavy Equipment and Become Worry Free

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Being in the construction business and not having to deal with heavy construction equipment is like learning to swim without actually getting wet, in short, impossible. When dealing with construction equipment, it is obvious that mishaps and accidents are going to be a commonplace affair.

Why Is Insuring Your Heavy Equipment So Important?

It goes without saying that heavy equipment cost quite a fortune, the damage of which contributes significantly to the loss of precious time and money. While the time factor cannot be apparently helped with, the money factor can definitely be. Insuring your heavy equipment with the best insurance companies on the block seems to be a good means of coping up with such unprecedented financial loss.

Safety and security measures apart, there still remains a certain danger of mishaps which sometimes seem to unavoidable. Financial losses owing to heavy equipment can occur in more than one way. Your heavy construction equipment may be stolen, damaged by fire, or any other accident, or may be liable to casualty in any other way. In such a scenario, insuring your equipment comes across as a good thing to do as that proves to be of immense help financially in case of such losses due to such damage.

Looking For the Best Insurance Companies- Things to Keep In Mind

Now that it has become quite clear that insuring heavy equipment plays a major role in recuperating with the losses that occur due to the damage of such equipments, it would also do god to know the best way in which construction companies can go about insurance company hunting. Like everything else, this also has a check list, the ticking off of which before approaching a company for insurance seems to be a good approach.

  • There are a number of insurance companies available on the block. It would be prudent to choose a company that offers insurance policy that best caters to your needs. You should be well aware of the potential hazards that your heavy equipment can face and look for a policy accordingly.
  • It is also crucial for you to pick the insurance companies that cover most, if not all, the areas of cause of damage that your heavy construction equipment might be susceptible to. You would certainly not like to settle for an insurance company that does not cover half of the areas required that is required.
  • Comparing the policies of different companies also seems to be a worthy decision as it will ensure that you are not missing out the best policies available on the block and also enables you to have a fair idea of the various schemes and offers doing the rounds.

Selecting the best insurance companies certainly comes across as a good decision as the policies that they put forth for the insurance of heavy equipment satisfies most of the requirements of the concerned customer. Such organisations also take good care of their customers and do not delay in meeting out the financial help that construction companies might require in dealing with the loss owing to the damage of heavy equipment. So, if you are still having second thoughts about insuring your heavy construction equipment, then it is best that you leave such thoughts aside and settle for the best insurance company for assured financial help in time of need.

An overview on Caterpillar D6N XL Specs

Yet another exclusive and highly efficient equipment by Caterpillar is D6N XL. It is a combination of power, superior quality and is durable on toughest terrain. The best point about the machine is it on move and gives great visibility and makes it fuel efficient. The XL machine has various electronic control systems like GPS, Laser Grade as well as ATS; these machines improve the working condition and reduce any extra operational costs.

  1. Specifications—At the height of 9.47ft, it has 145hp and track gauge of 74.41inch. The Cat 3126B DITAAC model is an efficient tractor for heavy work round the clock. Not to forget, the engines meet the levels of exhaust emissions across the world. It is fitted with highly advanced controls of electro-hydraulic power which provides excellent manoeuvring of the machine.  Further it has differential steering which can conveniently keep a hold on both tracks especially during turning. These can control the speed of the equipment, direction and other such specific work.
  1. Performance—The efficient Caterpillar D6N XL Specs give it a very good performance and cuts down any additional operating cost. The rugged and reliable parts of the tractor insure that there is power. It has proved to be a reliable machine especially where there is good paved road and digging needs to be done. In addition the modular structure helps in handling the machine and provides easy maintenance. It has proved to be a durable machine due to its excellent manufacturing features.
  1. Designing—The designing of the operator’s cabin is such that it can distress the operator. The sound proof cabin has very low vibrations and to enhance the performance of the operator provides great visibility. It has smooth air circulation through its air conditioning which neither makes the cabin cold or warm. The structure is specifically designed to reduce any fatigue and help the operator to work for a long duration.
  2. Customer Support—Whether one owns, rents or get from resale; the company provides good customer support system. This makes working with Caterpillar D6N XL even simpler and convenient. If required one can get a customized plan agreement for customer support. In all respect company’s aim to fulfil the desire and aspirations of the customer.

One can either rent Caterpillar D6N XL or purchase it from an online or an offline stores. There are numerous dealers who are into retailing and renting of the machine. They offer their service online and also provide with comparative analysis for the benefit of the customers. This can give them value for money and reduce their expenditure on machinery. For more information on the specs or for comparison, one can check out the reviews and product details at an online store. It can easily remove soil and make a place for work, so learn more and buy the best product through on