Category Archives: Machinery

Different types heavy equipment in landfills

There are different types of heavy equipment which are used at landfills but which particular type of heavy equipment will be useful for you, depend on the landfill’s operational needs. Its needs normally based on the conditions of the soil, landfill’s size and also the amount or the type of the waste material. Actually all the operational tasks need the use of heavy equipment. If you want to complete your task then you have to take help from the heavy equipment as an example every landfill requires such equipment in order to take waste material from one place to another place.  There are different kinds of heavy equipment which serve some of the important works in landfills. Check it out.

Transport:

Different kind of trucks like Dump trucks or the truck loaders help to transport all the waste materials into the landfill compound or to the landfill. These trucks are specially used for transportation of the materials so it consists of a huge bay at the back in order to carry such materials. In the fixed ‘dump’ place of the landfill, the trucks gather all the waste materials. Cover materials are also transported by such trucks to such places and those things are used in the waste covering process.

For movement:

Bulldozers are also very useful for such works; they also help to move the waste material to the right place. Big, huge amount of materials can be transported through such vehicles which are designed with heavy attachments and provide such facilities.

For compaction:

In order to decrease the total area, compaction helps to crush the material. Compactors and bulldozers can perform such works due to their heavy weight. They make a track and move around the track in order to break up their heavy weight on the waste material. In order to compressed the waste in the dump area one has to drive such heavy vehicles over it.

For covering:

Bulldozers, loaders, trucks, backhoes, scrapers and compactors everything helps to cover the material. Soil and other such materials work as the covering material and help to cover the waste material. Backhoes help to uncover the covering material and the heavy trucks take it to the right site. The bulldozers move the covering material and the compactors compact the material over the waste.

Different types of equipments:

 

Excavator: The other name of the excavator is a track hoe. It basically is a large type of machine which has a ‘pivoting base with a cab on top’. There is an articulated arm which actually helps to operate the bucket and the bucket is used to gather huge amounts of rock, soil or waste. Generally people used this excavator for different types of works such as river dredging, hole digging and mining.

Backhoes loaders: It has been used in many kinds of purposes like landscaping, hole digging and demolition.
Such heavy equipments are used in many kinds of operational tasks that require the transportation of heavy material like gravel or dirt.

Want To Make Your Heavy Equipment More Efficient and Productive – Read This to Know

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

In today’s time if there is anything that can gain maximum profits to an entrepreneur, then it is the construction business. Many have become rich by being in this industry and learning the know-how of the trade. However, almost all of them would give major credit of their success to the kind of heavy equipments they possess. They understand the importance of the machines in the construction sector and also know that without their existence, it would be almost impossible to put their hand in any major construction project. It also becomes imperative to keep these machines working at all times and therefore they have to ensure that they service the machines at regular intervals.

Heavy equipments are quite expensive and it definitely takes a toll for one to buy a machine. Therefore, the one who possess the equipment would do everything possible in his limits to keep it in the working mode all the time. When you have a project in hand, you expect all your machines to work and if any of them fails to perform due to unforeseen technical issues, you suffer heavily for the day and that continues till you get that fixed.

We would be discussing about ways and methods one must imply to always keep the equipments in working condition and also to make them more efficient and productive.

Change the faulty parts:-  There are times when the machine stop working as a part of it gets faulty. Well in this case, it is not the entire machine that is at fault. It is just the part that needs to be replaced and once that is done, you can have the machine working just like before. You also need to be well informed about the various parts of the machine and from where you can buy them at reasonable rates. There are many dealers who sell parts of machines. However, not all can be trusted. Hence, it’s better to know someone who deals with parts of machines and does ethical business. Also, by giving regular business to him, you can set up a rapport with him which will in turn benefit you in many ways.

Regular maintenance of the machine:-  This point ideally gets skipped due to constant working of the machine. Nevertheless, it is very important to conduct proper maintenance of your machine without which you will come across frequent problems and one fine day it will simply cease to work. It is pretty obvious that no one would want an expensive item to stop working just because they did not have the time to keep it well maintained. Proper oiling of the machine, replacing defective parts and things of similar nature must be done on regular basis to keep the stuff always at work.

Hire technicians to take care of the machine:-  It may not be a possible task for you to take care of your mighty business as well as your machines at the same time. You must therefore hire technicians who are expert in dealing with machines and know what needed to be done to increase the life of the machine as well as enhance its productivity and efficiency.

Why do the mighty construction companies have faith in John Deere?

A number of heavy equipment construction companies have come in the market in the past few years. Many of them are quite good. But most of them have failed to make their position along with a good reputation in the market. However, in today’s era, the one company that most of the construction companies blindly depend on in case of their construction machines is the John Deere company. Formerly known as the industrial equipment division, the construction and forestry division of the John Deere company started its journey in around the middle of 1950s. They began with only one dealer for selling and distributing their products in the year 1957, and today they have over 600 dealers worldwide for the distribution of the heavy equipments that are manufactured at John Deere.

In the top 100 heavy construction equipments that are always on demand of the buyers, most of them are the John Deere equipments. This is not because there are no other heavy construction equipment companies available in the market, but John Deere has achieved this place solely in terms of the quality of their products.

What are the factors that make John Deere better than others?

A company can make its place in the market depending on various parameters. Even if the company fails to cater at least one of these factors, then its future might be in trouble.

  • Quality is the key to any successful company. If the product that you manufacture is not up to high class quality, then it will not make its place in the market. Advertisement might bring it to the limelight, but for a long term business, it is very important to maintain the quality of the product. John Deere, in so many years of its career has never compromised with the quality of the heavy construction equipments that it manufactures.
  • The next most important thing is the after sales services. The John Deere company always provides its consumers with every possible customer service till their satisfaction; therefore the reliability and trust of the consumers get increased.
  • One of the most important factors that John Deere keeps in mind is innovation. They keep this a prime importance that the company manufactures construction equipments that are helpful, beneficial, and easy to handle and effective for multiple purposes.

John Deere has always focused on these factors, that has made them the most favoured and reliable company. Customer satisfaction is their motto. What the customers’ needs are and how to fulfil those needs has always been important to John Deere. Be it a backhoe loader, a barrel crusher, a crawler dozer, a grader or even an excavator, John Deere has so many options that you will be confused which one to select and which one to not. A whole range of heavy construction equipments, that are manufactured at John Deere, make them the most preferred and chosen ones by the mightiest of construction companies all over the world.

Impact of Modern Heavy Equipments on Your Business

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

One of the biggest factors that take your business to the notch is the kind of equipments you possess. As long as you are working with equipments which are either outdated or not much in use, you can’t expect any exponential figures from the business. This is a rule in every business however, if we are talking exclusively about construction then there can’t be any compromise on heavy equipment. You need to have the best equipment to achieve desired results.

Though, it also depends upon the kind of activity and the level of project you are in. If you have your hands in a huge project like re-construction or an airport or a shopping mall or something which is of a higher scale, then you need to have the most modern equipments with the latest technologies. Any compromise in the quality of equipments would result in poor construction and eventually will hurt your goodwill big-time.

In order to ensure that one has the highest quality of heavy equipments, the following points would be helpful.

Purchase equipments directly from the company:-  Big construction companies tend to buy heavy equipments directly from the company. These construction companies do not look for any discounts. What they want is pretty simple. They want the machine to have all the latest technologies that will make the work of the operator much easier and will allow him to complete the most tedious work in less time with 100% accuracy. These companies know what they are dealing with and any degradation in the quality of their work will fall very hard on them. Thus, they prefer buying the best of all directly from the heavy equipments manufacturing company.

Better to take guidance from people who know:-  In case, you do not have adequate knowledge about heavy equipments, it’s better that you speak with someone who knows about them. You can consult with someone who is working with machines day in and day out and is knows to give valuable advices. You also have the option to put your questions on the forum so that experts can give their views on it. This will help you understand about the machine you’re looking to buy. Similarly, you can also take along an expert while you go to shop heavy equipment. Renowned construction houses have a team of experts who have learned on various machines and when it comes to buying them, they become the most sought species.

Do your own research:-  If it’s your business and you want to take it to the pinnacle, it’s you who need to know more about your machines. Therefore, it’s advisable that you do a lot of reading of your subject on the internet or buy some magazines related to heavy equipments and hopefully you’ll find many things that are useful for you. Knowing about things by your own gives you the advantage of going for the best deal and also that you don’t have to depend on others for their much needful advices.

Modern machineries are the need of the hour and plays a pivotal role in scaling your career.

What Heavy Equipments Are Needed For Road Construction

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Construction of roads is an ardent task for both the government and the one who has taken the job. Companies given the job to construct roads need to have all sorts of heavy equipments available with them as heavy equipment has its own significance in road construction and without them it’s pretty unimaginable to even move a stone from one place to the other. We need a bulldozer to level the land or an excavator to excavate the land, remove the waste mud from the place and then level the land. Then we may also require a loader to take off the snow from the land or if it used to construct a road in mid of a forest, then it can be used to carry the logs and ferry it from once place to the other. Therefore, each machine has its own significance in this purpose and the absence of any of the machine can severely impact the entire project.

The construction company needs to have a thorough knowledge on how things work in this domain. Any previous experience in constructing roads will always work as an added advantage to them. We would be discussing in brief about the role than heavy equipments play towards the construction of roads in US.

Hydraulic excavators:-  These are used to excavate earth and remove the unwanted mud from the face of the earth and dump it in a truck. It’s not only used to excavate earth but also used to remove huge blocks of stone, logs lying on the ground and things which are unwanted and needs to be dumped. With the help of the shovel, it takes up the stuff from the earth and put it in the truck which then ferries them in the dump yard.

Bulldozers:-  Bulldozers are ideally used to level the land. They have those heavy rollers in their front which is used to crush every particle that’s in its way and mixes it with the layer of the earth. Bulldozers are seen in many road construction sites rolling the tar on the road and make the surface smooth as ever.

Loaders:-  This is another important heavy equipment which is widely used during construction of roads. Especially places which have the surface covered with snow, the loaders are extensively used to load the snow in the bucket and ferry it to the truck. Many construction companies are using hydraulic loaders which give them high power, more efficiency and low fuel consumption.

Articulated trucks:-  When we talk about construction of roads, articulated trucks plays a significant role in getting the work done quickly. The heavy equipments take off the unwanted materials. However, that is loaded on the truck which eventually ferries the stuff to the dump yard or which is on the same job site. Without these trucks, life would have been very difficult for the construction companies and thus considered as important equipment.

Companies that manufacture heavy equipments are Caterpillar, John Deere, Hitachi, Volvo etc. Roads bridge the gap between 2 cities and are very imperative as far as the growth of the nation is considered.

Want To Buy Construction Machinery Equipment – Read This Before You Decide

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

Irrespective of you having a start-up construction business or have being running it since a long time, the pre-requisite of any successful business is good construction machinery. The skills of the workers also play a role in shaping up your business but more importantly it’s the kind of machines you have that indicates where your business will be in the next few years. Alternatively, you also have to keep on upgrading your heavy equipments which largely depends on what kind of system the operator needs to get the work done. Engineers of heavy equipment manufacturing companies are working hard to bring innovative changes in the technology of the machines which in turn would be helpful to the operators.

Buying construction machinery equipments largely depends upon the kind of project you are into and if at all the operator can comfortably operate the machine. Below are some points which suggest when you should go for buying heavy equipments.

You company’s finances are in order:-  Important financial decisions can be taken only if the financial situation of the company is well in order. If you have just started up with a construction company, it’s advisable not to go for a buying spree. That will not only hurt your company’s finances but will also deter you to invest any further in upcoming projects which in turn will result in huge losses for the company.

Out of projects:-  New entrepreneurs often commit the mistake of buying heavy equipments and keeping their guns ready to fire. However, it gets too late for them to realize that they don’t have any projects with them and have to pay monthly installments to the bank, failing which the bank may confiscate the equipment. Hence, it is recommended that one should not jump into starting up their own business as long as they have not earned some level of maturity and a bit of knowledge in their respective domain.

Using alternatives:-  Buying is perhaps not the best available option when you have other option at your disposal. It makes more sense to take the equipments on rent rather than spending a fortune to buy them. The moment you bag a project, the next thing would be to begin taking heavy equipments on rent. You’ll find plenty of people willing to give the machines on rent. Make use of those opportunities and try to save your money for expanding your business.

Do some research before you finally decide to buy:-  This point is applicable for companies who are in this industry for a span of 5 years or more. They might be pretty settled as far as their business is concerned and can look for avenues to buy brand new and technologically advanced heavy equipments. It’s rather imperative for them to do a thorough market research and check which heavy equipment would apt for their project. Also check if buying them directly from the company would be advantageous or simply shopping it from the dealer would help them get more discounts. Also, look for other avenues before taking the final call for buying construction machinery equipment.

Find Out the Features & Utility of CAT 140 Motor Grader

Taking off snow from the road or putting aside huge logs and dump it in the truck, all these can’t be done without the help of a grader. Not only taking the snow off the roads but also it is used for moving earth. It can be widely seen in a construction or a mining site taking away huge blocks of debris or mud and dumping them in one corner. It has a long blade in the front which is used to make a flat surface. All the standard models come with 3 axels. The engine and the cab are located above the rear axle and the third one is situated near the front end of the machine. The blade is located just between them. The engines have a capacity of 125-500 hp which increases the productivity of the grader.

Having given a brief description of a grader, we would now be discussing in length about CAT 140 Motor Grader and how useful it is with respect to the construction and mining industry.

Let’s us begin with how useful it is in view to the operator. Engineers working with CAT have ensured that they pay more stress on providing high level of visibility to the operator. This is how they came up with angled cab doors, engine with tapered enclosure and slanted back window. This has helped a long way for the man inside the cabin to have an eagle’s view to things outside the box. They have also changed the control levers and steering wheel with joystick controls which facilitates the operator to work on those two things rather than keeping a count of number of switches inside the cabin. The space in the cabin has also been extended to give more room to the operator. Well, this lets him to relax inside the cabin when he’s got nothing to do.

The model 140 and its subsequent series are fitted with C9.3 ACERT engine which is considered as one of the best in the industry. This particular engine has supreme torque and significant capacity to pull things which are either sudden or short-term loads. While it does this, it can also maintain desirable grading speeds which permit it to get the work done faster without any sort of downshifting. The 140 series has been installed with “hydraulically demand fan” that automatically adjusts the cooling speed of the fan which is certainly done as per the requirements of the engine cooling system. This actually takes off the burden from the engine which allows it to use more horsepower on the ground and thus increases the efficiency of the desired job.

The brakes provided in the 140 series are hydraulic which gives more power to the brakes when they are applied. It also reduces the chances of the brakes getting deteriorated and thus increases its life. 

Overall, CAT grader 140 series is a machine with low maintenance cost, thus saves good deal of money of the owner and also consumes less fuel thereby help the company to make maximum profits.

During Summer Give Your Machine the Coolant It Requires

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

A construction site when it is in full swing is full of dust that forms a layer up to certain height. These dust particles enters the small pores which are left uncovered in the machine and when the dust gets accumulated in there, it causes problems to the machine. Therefore, there are various tools available which helps to take off the dust from the pores and keep the stuff working. Another major challenge which construction equipment has to experience is the scorching summer heat and on top of that, it is expected to work round the clock. This results in the machine becoming hot in no time and that eventually affects the life of the machine in a number of ways.

It is evident that we can’t do much about the summer heat but we can definitely fight it out to give more strength to our machine. There are number coolants available which if applied in the machine can help the engine to become cool faster and will thus help it to work for long hours. It will also prevent the equipment from getting shut every now and then which ideally happens when the engine becomes excessively hot and can’t take the heat anymore. Initially, not much mechanism was there to cool off the engine. However, the case is not the same any longer. The engineers of various heavy equipment manufacturing companies are producing machines where a set of coolants can be installed which will help the machine to cool off without interrupting the flow of the work.

We would also be discussing the various reasons why different coolants are required on heavy equipments.

To increase the life of the machine:-  Heavy equipments are highly priced items and it takes a good deal of money to buy a new branded equipment. Suppose, you have multiple projects in hand and for that you have allocated construction equipments accordingly at different locations. You would not want them to give up just because it does not have sufficient cooling systems in it. That would perhaps the last thing you would want to happen with your ongoing projects and that really hurts. Therefore, you might want to do everything possible to ensure that your equipment has the coolants to keep the engine buzzing and also that it continue to perform with the same intensity in the future.

Keep the atmosphere cool inside the cabin:-  Other than the engine, there is one more important place which always needs to remain cool and that is place in the cabin which is meant for the operator. Heat in the summer is killing and it can take its toll on the poor chap sitting inside the box operating the big gun. It is very important to ensure that there is proper cooling system installed inside the cabin which keeps the environment cool and workable. That will also lower the risk of accidents happening in the construction site.

A proper coolant can make life very simple both for the machine as well as for the one operating it.

Looking To Buy A Scraper? Go For Cat 623

If you are having a construction business where you are associated with mighty projects, a Scraper is something you can’t do without. Though the involvement of other heavy equipments is not ruled out, a scraper is considered to be the most important heavy equipment due to its versatility, reliability and high degree of performance. The front of the scraper can be fitted with various applications based upon the need of the circumstance. N order to clear the mud/debris from the earth, a bucket can be installed in the front using which the stuff can be pulled out and dumped in the truck. It can also be used to dig earth and make a hole on its surface to give strong foundation to the building.

Companies that manufacture Scraper are plenty in number. Nevertheless, the one that leads the rank is Caterpillar. Cat is renowned for manufacturing quality scrapers which has undergone years of testing and then has been finally launched for the consumers. Time again, changes are made by the engineers to add more features in the product which makes it a compact product for the consumers. For instance, the engineers have worked a lot on providing comfort to the operators by making several changes such as deploying the switches at close range, putting more cushions on the armrest and things thereof.

Cat has produced many models of scraper. Out of the many, we would be discussing about CAT 623. Starting with the engine, the tractor has 3406CAT engine. It’s considered to be the most consistent engine which is also known for consuming less fuel which in turn results in higher productivity on the field. Speaking more about the engine, it produces around 407 hp which seems to be 18% more as compared to its earlier models. CAT has also designed a new torque converted which is capable to deliver more power to the bottom. The capacities have been tremendously increased from 2 cubic yards to 24 cubic yards.

Features like these are not provided by any other construction equipment manufacturing companies. Though other companies are trying to match the pace and catch up with CAT’s technology, but the high performance machines of CAT always keeps it a way ahead from other companies.

There are 2 ways through you can buy CAT 623 scraper. You can directly reach out to the company and check if they have that model available with them or you can contact the nearest dealer and buy it from them. However, out of the two options, the best would be to close the deal directly with the company. There you can expect some discounts if you make the entire payment at one go. Alternatively, if you choose to take a loan, you shall get it at a very low interest rate. All these things are handled by the company. A dealer may not be able to offer you such facilities. At the same time, you can call the company if you see any problem with the machine. They would either fix it or get it replaced.