Tag Archives: Be Safe

Be Safe While Operating a Crane- Take Certain Precautions

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

If you are a part of the construction industry, you must be well aware of the potential hazards that the use of heavy equipment poses. Wondering what is it that you can do in this direction? Well, starting off by incorporating certain precautions with respect to the handling of heavy construction equipment would be good.

Cranes- An Indispensible Part of the Construction Industry

It is a widely known and accepted fact that heavy equipment is an indispensible part of the construction industry, without which the industry would cease to exist. And cranes are one of the most important equipment in the arena of construction. Used as a means of carrying load from one place to another, cranes prove to be a great alternative, getting the entire job done faster and more efficiently as compared to manual means. Not only does it save a lot of time, but also reduces physical labor by a considerable extent.

What Can You Do To Remain Safe While Operating Cranes?

As in the case of any other heavy construction equipment, cranes too are susceptible to be the cause of potential hazards when not handled carefully. However, certain precautions can always help in the reduction of the rate of mishaps if not altogether eliminate it.

  • You could begin by checking the different parts of the crane before it is put to use. Make sure that all the parts are in order now and then in order to avoid potential mishaps from the use of cranes with faulty parts.
  • Ensure that the load placed on the crane is proportional to its capacity. Not only is this important for the optimum performance of the crane but is also a way of steering clear of the danger zone by forcing the crane to bear more load than it can.
  • It is also prudent if crane operators work along with another co-operator so as to have a helping hand when in need. This way one of the partners can work as the signal system when in need. But ensure that the second person selected by you is well up to the job.
  • Those responsible for the smooth operation at construction sites must make sure that they hire operators who are sufficiently skilled and have proper training in the field. It would also be best if they are also well aware of all the safety precautions.
  • Double checking the loads before starting your day with the crane is another precaution that you could consider.
  • And last but not the least- be absolutely alert when operating with the crane. Ensure that any kind of damage or glitch is reported immediately and sorted out. This is one simple measure that could save a lot of damage with respect to cranes at construction sites.

As it has always been said that “prevention is better than cure”- the same holds true for the operation of cranes. It is best if you are alert and practice certain precautionary measures instead of waking up to damage control after the mishap.

Be Safe When Operating Heavy Construction Equipment- Check Your Safety Checklist

Podcast: Play in new window | Download | Embed

Subscribe: Apple Podcasts | RSS

If you are into the field of construction, then you are sure to be well acquainted with the nature of the various hazards associated with the business. In fact, working at a construction site and not facing hazardous situation is like learning to swim without getting wet- not really possible, is it? However, there are ways in which you could minimise the probability of their occurrence, if not completely eliminate it.

Why Is It Important To Have A Heavy Equipment Safety Checklist?

One of the many ways you can ensure that you are absolutely safe at a construction site is to make sure that the heavy equipment used are in complete order. And how are you going to that? Well, having a heavy equipment safety checklist is one of the many ways of accomplishing this. What with all the heavy equipment, bricks and mortar etc involves n the whole business, one could say the construction sites to be a potential site for casualties. In such a scenario, the heavy equipment safety checklist not only enables workers to be safe but you will also be able to take preventive measures and minimize the hazards involved in working with heavy construction equipment, thereby reducing untoward accidents.

Things to Look Out For In Your Checklist

Heavy equipment safety checklist is important. But what are the aspects that must be covered by a heavy equipment safety checklist?

  • Your heavy equipment safety checklist must have the working conditions of all of the parts of the heavy equipment covered. Be it the engine, brakes, buckets, teeth, or anything else- ensure that you do not miss out on any of these.
  • There is no doubt about the fact that the smoke emitted by construction equipment along with the loud noise forms a cause of hazard not only for the workers but also for the people near the periphery of the construction site. It is, therefore, important to incorporate points on the compatibility of the heavy equipment with the environment in order to minimize the levels of pollution.
  • Another safety aspect that must be included in your checklist is the concerns related to power consumption. Making sure that your equipment is not in the danger zone with respect to electricity is also important. It is, therefore, best to incorporate points related to this in your heavy equipment safety checklist.
  • You could also consider incorporating points related to the operator in your heavy equipment checklist. Factors associated with the age, training and skills of the heavy equipment operator should have priority in that list.
  • You could also consider including points related to safety gear and the like in your heavy equipment safety checklist. This will ensure that you are absolutely safe when using the heavy equipment.

The safety of your workers along with yours plays a crucial role in the completion of your construction project and on this depends the success of your company. It is, therefore, important to have a good safety checklist at hand before operating the heavy equipment.

 

 

Related articles across the web

Be Safe When Handling Heavy Equipment- Use Properly Equipped Safety Tool Box

If you are into construction, then dealing with heavy construction equipment must be second nature to you. The construction equipment are perhaps the most aspect of the business, without which the basic purpose of the entire thing would fail to serve its purpose. And since, it is such an important part of the business it would not do to overlook the hazards involved in it.

Why Is the Safety Tool Box Crucial In Being Safe?

Heavy equipment that form an important part of the whole business, is also a major contributing factor to the various mishaps that takes place on site. Hence, it is crucial to make sure that you have enough safety measures on hand so that you are well assured of your safety. The engineers and supervisors on site have to ensure that the workers who are working for the industry have a safe working environment and for that it is important that some basic safety measures are undertaken by them. Among the many safety measures that one can take in order to prevent accidents from occurring at work site, the safety tool box forms an indispensible part.

Things That You Should Know About Your Safety Tool Box

No doubt safety tool box are a must have when dealing with heavy construction equipments, but its mere presence is not really going to help you out. For the safety tool box to come handy, it is important to keep account of some pointers. For one, you should be aware of the safety equipment that are present in your tool box. Without proper knowledge of the equipment, it is obvious that you will not be able to identify the tool that you would need at that point of time.

The supervisors of the construction site should also conduct regular tool box meetings in order to ensure the presence of all the relevant tools and make the workers aware of their use. Such discussions do more than enough in educating the workers about the requirement and the correct use of the safety too box.

What Kind Of Safety Tools Should One Have In The Safety Tool Box?

Among the many equipment that are a must have in the safety tool box are the presence of equipment that check the brakes of the heavy equipment. Brakes form an important part of all heavy construction equipment, such as the dozer, excavator, dump truck and the like. Hence, it becomes mandatory to have the brakes in order so as to ensure the smooth operation of the equipment.

Another kind of safety equipment, the presence of which is a must in the safety tool box, especially those having lifting utility, such as the crane are the ones that check if the lifting devices are in order. Not having the lifting device in order can be the cause of serious hazards on the site. Hence, it is important to check the availability of these devices before the operation of such heavy equipment.

Safety is the key word for working and deriving positive results in any field. Owners and the supervisors recruited are responsible for providing a safe and secure working environment for the workers and one of the ways in which they can do it is to ensure that the workers operating the heavy equipment have a satisfactorily equipped tool box to prevent or reduce the effects of a mishaps.